Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateDoorKing Gate Repair in West Palm Beach, FL | Carver Gate Repair West Palm Beach
Our Gate Repair in West Palm Beach for DoorKing systems typically runs $185 to $340 for most service calls, with motor replacements on 9150 slide operators landing between $900 and $1,400 depending on the model year and corrosion damage. We’re Carver Gate Repair West Palm Beach, an independent DoorKing service provider, and the one thing that separates our work here is that we diagnose against salt air and afternoon lightning before we ever order a part. If your gate stopped working near the Intracoastal or in an older neighborhood like El Cid, call (728) 203-2413 and we’ll put a tech on it.
Why West Palm Beach Residents Choose Us for DoorKing Service
Our techs work on DoorKing controllers and gate operators daily across West Palm Beach, which means we see the failure patterns that only show up after a few brutal summers. That hands-on depth matters more than a manufacturer logo on a van. We stay fully independent. We do not claim DoorKing endorsement or authorized status. What we do claim is that we have opened enough 9150 control boxes with green fuzz on the contactors to know exactly what happened before the gate stopped moving.
Lonnie Burke runs our West Palm Beach operation. He started in metal fabrication and welding at LA Trade-Tech, then spent twenty years working through every gate problem a Florida property can produce. His rule is simple: figure out what broke first. Everything else follows from that. That discipline is why our techs don’t shotgun parts at a problem. They test, confirm, and then quote a written price before anything gets touched. For full DoorKing sales & service depth across model lines, this is the standard we work to every day.
Styles & brands we work with
Common DoorKing Gate Repair Problems We Solve in West Palm Beach
- Corroded limit switch arms on 9150 slide operators. Salt-heavy air off the Atlantic eats the switch housing and the arm itself. We see gates that stop three feet short of the post or slam into it because the limit circuit is reading wrong. We replace the switch, seal the housing, and test the full travel twice.
- Moisture intrusion in 1838 telephone entry boards. Afternoon thunderstorms blow through West Palm Beach regularly, and the 1838 board sits in a housing that was never designed for that much humidity. Phantom keypad presses, dead intercom audio, or stuck relay outputs usually trace back to corrosion on the board. Sometimes we can clean and re-coat it. Sometimes the board is gone and it’s a straight swap.
- Overheated motors on 6050 swing operators. In unshaded driveways around El Cid and Prospect Park, a 6050 motor running in August heat will trip its thermal overload and refuse to move until it cools. The fix isn’t always a new motor. Often it’s a combination of cleaning the cooling fins, verifying voltage at the board, and adjusting force settings that were never right from the install.
- Battery backup contacts degrading from humidity. Inside 9150 control boxes, the backup battery terminals corrode fast in West Palm Beach’s humidity. The gate works fine on utility power, then fails during a power blip after the storm knocks the grid. We replace the contacts, load-test the batteries, and seal the box properly.
- Weld and rust failures on ornamental gate frames. West Palm Beach’s mix of historic Mediterranean Revival homes means a lot of custom wrought iron. Rust gets into the pickets and hinge points, and eventually the gate sags or a weld cracks. Our team does weld repair and rust remediation on DoorKing-equipped gates so the operator isn’t fighting a gate that’s lost its geometry.
DoorKing Service in West Palm Beach: What Local Conditions Mean for Your Equipment
Unlike inland communities like Wellington or Royal Palm Beach, West Palm Beach’s historic El Cid and Prospect Park neighborhoods sit less than a mile from the Intracoastal Waterway. That’s not a trivia point. It means gate operators there accumulate salt crust on motor housings and circuit boards three times faster than gates even five miles west. We schedule semi-annual contactor cleaning for those customers because we have pulled too many 9150 motors where the commutator was green and the gate simply stopped after a rainstorm. If you live within a mile of the water, your DoorKing equipment is aging faster than the same unit on a gate in Greenacres. That’s not guesswork. It’s what the inside of the control box tells us.
DoorKing Models & Products We Service in West Palm Beach
We service the full line that homeowners and HOAs around West Palm Beach actually run: the DoorKing 9150 Vehicular Slide Gate Operator, the 6050 and 6100 Commercial Swing Gate Operators, the 1838 PC Programmable Telephone Entry system, and the 80 Series Telephone Entry Systems. When continuity matters, we install genuine DoorKing OEM boards, motors, and limit switches. But we will also recommend quality aftermarket contactors, transformers, and loop detectors where they match OEM lifespan at lower cost. And when a 20-year-old operator has lived past its second motor and third board, we’ll tell you plainly that Gate Installation in West Palm Beach is cheaper than rebuilding it again. That honesty is part of the written quote, not a sales pitch layered on after the diagnostic.
See the difference
Before
After
Before
After
Before
AfterDoorKing Service Pricing in West Palm Beach
Most DoorKing repair calls in West Palm Beach fall between $185 and $340. A limit switch replacement on a 9150 usually lands around $225 to $275. A 6050 motor swap runs $650 to $1,100 depending on whether it’s a standard or heavy-duty arm. Complete operator replacements start around $1,800 and go up with gate length, access control integration, and the condition of the existing conduit. The price is written before work starts. It does not move at the door. That’s The Garrison Standard, and it applies to every call we run. Call (728) 203-2413 for an exact quote on your equipment – estimates are free.
Serving West Palm Beach, FL - Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – DoorKing Gate Repair in West Palm Beach
Because the salt air off the Intracoastal is corroding the motor’s commutator or the limit switch contacts, and the moisture from the storm accelerates it overnight. The gate runs while the corrosion is warm and dry from daytime heat, then seizes or faults after the humidity settles in. We see this exact pattern on Flagler Drive properties every summer. The fix is usually a motor or limit switch replacement, plus sealing the housing so it doesn’t return in six months. Call (728) 203-2413 to schedule a diagnostic.
Yes. The 1838 has relay outputs that can trigger a video intercom’s door release circuit, and we do this integration regularly for West Palm Beach homes that want a visual on who’s at the gate. We run the low-voltage wiring, program the relay timing, and match the new intercom to the existing keypad and phone line behavior. Independent service providers like us are often the only option for this work, since authorized dealers rarely take on integration jobs across mixed brands. Call (728) 203-2413 for a free estimate on the integration.
It’s a West Palm Beach thing, and it’s common in El Cid driveways with no shade. The 6050 motor has a thermal overload that trips when the case temperature exceeds a safe threshold, and in August, a black motor housing in direct sun will hit that threshold even under normal load. The fix is usually a combination of cleaning the cooling fins, verifying supply voltage, checking the gate’s force settings, and sometimes relocating the motor if it’s mounted where it catches the worst afternoon sun. Call (728) 203-2413 and we’ll test it before we recommend anything.
Every six months. Properties within a mile of the Intracoastal Waterway – El Cid, Prospect Park, the Flagler Drive corridor – should schedule semi-annual contactor cleaning, limit switch inspection, and battery terminal checks. Gates five miles west can often go twelve months. Your equipment near the water is aging three times faster, so the service interval shortens accordingly. We set up recurring visits for exactly this reason. Call (728) 203-2413 to get on the schedule.
Not necessarily. The 1838 keypad is a membrane switch assembly, and when humidity gets inside the faceplate after a hard rain, the contacts can bridge and register phantom presses or a stuck key. We clean the contact points, replace the membrane if it’s cracked, and re-seal the faceplate. If the board itself shows corrosion from repeated water exposure, we replace it with a genuine DoorKing OEM board and then address the housing that let the water in. Call (728) 203-2413 for a diagnostic – we’ll tell you which it is before we quote anything.
Service Areas Near West Palm Beach
We run DoorKing service throughout West Palm Beach service area and the surrounding communities. Our techs cover Boynton Beach, Jupiter, Greenacres, Riviera Beach, and Palm Beach itself. If you’re south of us, we handle DoorKing service in Boynton Beach. North of us, we run DoorKing service in Jupiter. One crew, same Garrison Standard, same written price before we start.
Book Your DoorKing Service in West Palm Beach Today
We answer the phone live, 24/7. We dispatch background-checked, uniformed techs. The price is written before any work starts, and every repair carries a 365-day guarantee in writing. If it fails inside that year, the second visit is free. Call (728) 203-2413 now and we’ll get a tech out to your gate.
Written by Lonnie Burke, Owner at Carver Gate Repair West Palm Beach, serving West Palm Beach for years, including regular work in the Northwood Hills neighborhood.