Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Lantana
A new driveway gate in Lantana typically runs $2,800 to $7,500 installed, depending on the gate type, opener, and what’s already on the property. We quote that price in writing before any work starts, so the number doesn’t move at the door. Call (728) 203-2413 and a live person answers, any hour, any day. We know Lantana’s lots, its HOAs, and its salt air, and we plan every install around those conditions instead of treating the job like any other South Florida suburb.
Carver Gate Repair West Palm Beach dispatches background-checked, uniformed technicians to Lantana neighborhoods including Lantana Cascade, Lantana Pines, and Moorings at Lantana. We’re the Gate Installation team homeowners call when they want a gate that still operates after a season of salt spray and a hurricane’s worth of wind. The Garrison Standard applies on every job: written price first, written guarantee on every repair, and a 365-day promise that if it’s not done right, we make it right.
Why Carver Gate Repair West Palm Beach Is Lantana’s Preferred Gate Installation Company
Lantana homeowners have a particular set of problems with gates, and our Gate Repair - Lantana team has worked through all of them. The Intracoastal is close enough that hinges and rollers corrode faster than even a few miles inland. HOA gates in the 55+ communities see hundreds of open-close cycles a day. Hurricane season leaves post footings saturated and operators burned out. A general contractor who does gates as a side job won’t catch the early rust on a rack and pinion or spec the right wind-rated post embedment. That’s what we do.
Our techs work on nine gate-motor brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters when a Lantana HOA has an older DoorKing on the barrier arm and a newer FAAC on the slide gate. Same crew, same day, both systems handled. Reviews from Lantana customers consistently mention the same things: the tech showed up when promised, the price matched the quote, and the gate ran right the first time. Lonnie Burke runs the crew to The Garrison Standard, and every job since 2008 has been built on the same two rules: written price before work starts, and a written guarantee when the work is done.
If you’re in Lantana and need a gate installed, you don’t want to chase a call-back queue. Our phones are answered by a live person 24/7, including weekends and holidays. When a storm knocks out power and the gate won’t budge, that’s exactly when you need to reach someone who can talk you through the manual release.
Styles & brands we work with
Sliding Gate Installation in Lantana
Sliding gate installation in Lantana is the most common project we take on, and for good reason: narrow lots, short driveways from the road, and HOA entrances that need a gate that won’t swing into traffic. A slide gate rides on rollers along a track, with a rack and pinion driving it open. In Lantana’s salt air, that hardware takes a beating. We spec marine-grade rollers, stainless fasteners, and operators with sealed control boards as standard on waterfront-adjacent properties, because the cheap parts fail inside a year.
Track and Roller Hardware for Coastal Conditions
In Moorings at Lantana, we replaced a rusted bottom roller on a slide gate that kept seizing after rain. The salty puddles that pool after a storm had eaten the sealed bearing. We paired a new LiftMaster operator with sacrificial anodes on the hinge post so the same failure wouldn’t come back within a year. That’s the difference between installing a gate and installing a gate in Lantana.
Typical Sliding Gate Costs
A basic single-track slide gate for a single-family driveway in Lantana runs $3,200 to $5,500 installed, including the operator. A heavier commercial-style slide gate for an HOA entrance starts around $5,500 and goes up from there based on length and cycle count. The price is quoted in writing before we order materials.
Gate Opener Installation in Lantana
Gate opener installation in Lantana means matching the operator to the gate’s weight, wind exposure, and daily cycle count, then building the power and control run to survive what South Florida throws at it. A light residential swing opener that works fine in a dry climate won’t last on a solid infill gate that catches hurricane-force wind and gets blasted with salt spray. We install operators from FAAC, BFT, Linear, Viking, and others, selecting the unit by the gate’s actual measured load, not a guess.
Battery Backup and Manual Release
Power cuts during severe weather leave automatic gates locked unless you know the manual release. We retrofit solar gate openers with battery backup on Lantana homes where the power is already unreliable during storm season. Every opener we install is set up with an accessible manual release, and we walk the homeowner through it before we leave. If the power’s out and you can’t get the gate open, call us, and we’ll talk you through the release over the phone.
Opener Replacement Costs
Gate opener installation on an existing gate in Lantana runs $1,400 to $3,200 depending on the brand, swing versus slide, and whether we’re adding battery backup or new safety edges. The written quote covers the operator, the labor, and the programming, with no number that changes once we’re on site.
Trusted Brands We Service in Lantana
Our techs are trained on the systems already installed in Lantana’s homes and HOA entrances: FAAC swing operators on the older single-family gates, BFT slide operators on the 55+ community entrances, Linear on the barrier arms, and Viking on the estate lots. We keep common parts for these brands on the truck, which means a Lantana customer with a failed limit switch on a Linear operator doesn’t wait a week for a part to ship from a distributor. The right part, the right programming, and a technician who’s worked on that exact board before, not learning on your gate.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Lantana Homes
- Saturated post footings from hurricane rain. When the ground around a hinge post gets waterlogged, the post leans, the gate drags, and the operator burns itself out pushing against the bind. The fix is a deeper footing with proper drainage stone, done before the gate ever goes up.
- Salt spray eating the rack and pinion. On slide gates within a few blocks of the Intracoastal, the rack teeth corrode until the gate jumps track. We install galvanized or marine-grade racks on coastal Lantana properties, and we inspect the teeth at every service call.
- Original HOA operators that are beyond repair. Many Lantana communities built in the 1980s and 1990s still run their original gate operators. Parts are discontinued, boards are obsolete, and replacement is a planned project, not an emergency patch. We quote full replacement with modern operators that meet current wind-load and safety-edge codes.
- Power loss leaving the gate locked shut. A gate with no manual release and no battery backup is a gate that traps residents during an outage. We retrofit battery backup and clear manual-release access on every install we do in Lantana.
Pricing for Gate Installation in Lantana, FL
Here are the ranges we quote in Lantana, written down before the first tool comes off the truck. A standard single swing gate with opener: $2,800 to $5,000. A sliding gate for a single lot: $3,200 to $5,500. A double swing gate for a wide driveway: $4,500 to $7,500. A full HOA entrance slide gate with barrier arm: $6,000 and up, depending on traffic loops, safety edges, and access control. Salt-air upgrades like marine-grade hardware and sealed boards add 10 to 15 percent, and we’ll show you the line item. Free measure, free written estimate, and the price doesn’t move after you approve it.
We Also Serve Cities Near Lantana
Beyond Gate Installation in Lantana, we cover West Palm Beach, Boynton Beach, Jupiter, and Greenacres with the same crews and the same Garrison Standard. If you’re a few minutes north or south, the drive doesn’t change the process: written price, uniformed technician, full-year guarantee.
Serving Lantana, FL - Our Local Coverage Area
We’re based in the Lantana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Lantana
Every automatic gate has a manual release mechanism, usually a keyed cylinder or a pull handle on the operator itself. On swing gates you disengage the operator arm and push the gate by hand. On slide gates you release the rack and slide the gate manually. If you’re in Lantana and the gate won’t release, call (728) 203-2413 and we’ll talk you through it, any time of day or night. If you don’t have a manual release you can access, we’ll schedule a retrofit so the next outage doesn’t lock you in.
Yes. We install operators with sealed control boards and marine-grade hardware for homes near the Intracoastal. FAAC and BFT both make units with conformal-coated boards that handle the humidity and salt better than open-frame residential units. We also specify stainless fasteners and sealed wire connections on every Lantana install within a mile of the water. The extra cost is modest, and it’s the difference between a five-year operator and one that corrodes out in three.
A slide gate with a heavy-duty operator rated for continuous cycles holds up best under Lantana’s HOA traffic patterns. Communities like Lantana Cascade and Lantana Pines run their entrance gates hundreds of times a day, so the operator needs a duty cycle that matches. A residential swing opener on that gate will fail within a couple of years. The slide gate also handles wind better, which matters when a hurricane warning goes up and the gate has to stay put.
Gate post footings in Lantana need to go at least 36 to 48 inches deep, past the organic topsoil and into the sandy soil below, with proper drainage stone around the post base. The saturated ground that follows a hurricane is what causes the lean and the drag that kills operators. We don’t cut this corner, because the repair is always more expensive than the extra foot of concrete.
Lantana generally follows Palm Beach County building requirements, which means most new gate installations on single-family lots need a permit, and anything at an HOA entrance definitely does. We handle the permit paperwork as part of the installation. The process adds a week or two to the timeline, but it keeps the job compliant with wind-load standards and avoids problems with your HOA or insurer down the road. Call (728) 203-2413 and we’ll confirm what applies to your property.
Written by Lonnie Burke, Owner at Carver Gate Repair West Palm Beach, serving Lantana with The Garrison Standard since 2008.