Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor Repair Across Westgate
When a gate motor quits in Westgate, it’s rarely a small problem. It’s a security gap at the driveway and a car trapped inside the property. We fix both fast. Carver Gate Repair West Palm Beach dispatches background-checked technicians for Gate Installation - Westgate and repairs with the parts already on the truck, and every job starts with a written price before any work begins. If you’re off Okeechobee Boulevard or down one of the canal streets near Sable Lakes, call (728) 203-2413. We answer live, 24/7.
Westgate gate systems have a particular failure pattern we know from thousands of service hours here. Salt air works on the control boards. Canal-front soil shifts after heavy rain and knocks slide gates out of alignment. The older the gate, the more likely a repair stops being worth it. This page explains what we typically find in Westgate and what it costs to fix.
Why Carver Gate Repair West Palm Beach Is Westgate’s Preferred Gate Motor Repair Company
Westgate homeowners call us because gate work is all we do. We’re not a fence company that also touches operators. We’re not a handyman with a multimeter. Carver Gate Repair is the gate specialist within the Garrison Partners family, and our crews work to The Garrison Standard: written price first, background-checked and uniformed technician at the door, and a written guarantee on every repair, good for a full year.
The Westgate neighborhoods we service have a mix of 1970s-era single-family homes with original swing gates and newer gated subdivisions with slide operators. That mix matters. A technician who only knows new LiftMaster installs will misdiagnose a 1980s FAAC swing gate. Our techs train across nine brands, so the right parts and the right know-how are matched to the system already at your driveway.
Every call to (728) 203-2413 is answered by a live person. Not a voicemail box, not a call-back queue. That includes weekends and holidays, because gates fail on Sunday evenings more than any other time.
Styles & brands we work with
Gate Operator Repair in Westgate
Gate operator repair in Westgate means getting the motorized arm, slide track, or swing mechanism working again without replacing the entire gate system. Most Westgate calls fall into a few repeat categories: control board failure, limit switch drift, gear or rack damage, and safety sensor faults.
Repair cost for a typical gate operator problem in Westgate runs $185 to $475. A bad limit switch or misaligned photocell lands at the lower end. A failed control board, especially on an older LiftMaster or DoorKing unit, pushes toward $400 or more. We give you the written number before the first tool comes out, and that number does not move at the door.
Control Board Diagnosis and Replacement
When a Westgate gate stops responding to remotes or keypads entirely, the control board is the first suspect. Salt air bridging contacts inside the enclosure is a common culprit on systems installed in the 1990s. We carry current replacements for DoorKing, FAAC, and LiftMaster boards and can usually have a matching unit installed the same visit.
Limit Switch and Travel Adjustment
If your gate opens halfway, reverses erratically, or slams at the end of travel, the limit switches need attention. On Westgate canal-front properties, this is almost routine maintenance after a strong storm season. We set the travel parameters, test the gate through ten open and close cycles, and verify the safety reversal before we leave.
Gate Motor in Westgate
Gate motor replacement in Westgate starts with the simple question: is the motor itself done, or is something around it causing the failure? We diagnose before we quote. A motor that hums but won’t move could be a seized gearbox, a capacitor, or a thermal overload tripped after the gate bound on a shifted rack. None of those require a new motor.
When replacement is the right call, a new gate motor for a Westgate property typically runs $650 to $1,400 installed, depending on the type and brand. Swing arm operators for older single gates sit at the lower end. Heavy slide gate operators for long canal-front driveways land higher. The written quote includes the motor, the install labor, and programming the remotes and keypad you already have.
Swing Gate Motor Replacement
Swing gates from the 1970s and 1980s in Westgate often have operators that were never rated for the weight of the gate after decades of added metal and rust. If the hinges are sagging or the post has moved, any new motor will work against that problem until the post is corrected. We check the plumb line before we order anything.
Slide Gate Motor Work
Slide gates are common on Westgate’s newer gated subdivisions and along canal properties with wider driveways. The rack and pinion system that pulls the gate depends on the ground under the post staying put. When drainage shifts it, the motor fights the misalignment and eventually trips. We re-level, re-shim, and replace motors when the old one has lost its torque to the fight.
Trusted Brands We Service in Westgate
Our Gate Motor Repair techs work across nine brands, and in Westgate we most often open panels on DoorKing, Viking, and Elite systems. DoorKing slide operators are everywhere in the older gated communities. Viking swing arms show up on custom canal-front homes. Elite units are on a lot of the newer HoA entrances. We stock common boards, remotes, and capacitors for these brands locally, which means fewer second trips and less time waiting on a part from a distributor.
Common Gate Motor Repair Problems We See in Westgate Homes
- Obsolete control boards after salt-air corrosion. A 1990s LiftMaster or DoorKing board corroding inside the enclosure quits without warning. The gate simply stops responding to every input. Retrofit boards or brand-matched replacements get the system back without a full operator swap.
- Canal-front slide gates binding on the rack. After the post shifts from drainage, the gate’s rack gears no longer mesh cleanly with the pinion. The motor runs loud, then trips its thermal overload. Fixing the post alignment comes before any motor replacement.
- Older swing gates without entrapment protection. Pre-2000s installs in Westgate frequently lack photocells or edge sensors entirely. The gate reverses too late or not at all. We add current UL 325 compliant sensors as part of the repair, not as an upsell.
- Keypad and receiver death after power surges. Florida lightning hits the low-voltage side hard. A keypad that stops working after a storm can be the keypad itself, the receiver board, or both. We test each component before quoting a repair, so you’re not paying for parts that weren’t the problem.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Motor Repair in Westgate, FL
A gate motor repair in Westgate usually lands between $185 and $475. Limit switch and travel adjustments run $185 to $260. Control board replacement, including the part, runs $350 to $525. A complete gate motor replacement runs $650 to $1,400. What moves the number is the size and type of operator, the brand, and how much of the surrounding hardware needs correction.
Before we start any work, you get a written price. That number covers the parts, the labor, and the cleanup. If the repair fails inside the guarantee year, the second visit is free. No charge, no argument. Call (728) 203-2413 for an exact quote on your gate. The estimate is free.
We Also Serve Cities Near Westgate
While this page focuses on Westgate, our crews also cover Gate Motor Repair in Westgate neighbors including West Palm Beach, Boynton Beach, Jupiter, and Greenacres. If you’re in a nearby community and the gate stopped working this morning, call (728) 203-2413 and we’ll tell you over the phone what’s likely wrong and when we can be there.
Serving Westgate, FL - Our Local Coverage Area
We’re based in the Westgate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in Westgate
The ground under the gate post settles and shifts as canal-side drainage patterns change after heavy rain. When the post moves even a quarter inch, the gate travels farther or shorter than the limit switch expects. The motor keeps running at the end of travel, which trips the overload or burns the capacitor. We correct the limit settings and, when needed, re-shim the post footing. If this is happening after every storm, the post itself likely needs attention, not just the switch. Call (728) 203-2413 and we’ll diagnose it properly.
Yes, a retrofit is usually possible. We can add photocell sensors and edge protection to most older swing gate systems, including original FAAC and DoorKing installs. The retrofit brings the gate to current UL 325 entrapment standards without replacing the operator. The retrofit costs less than a new operator, typically $225 to $400, and we complete it on the same visit for most Westgate homes. Call (728) 203-2413 for a written quote.
A hum with no movement means the motor is getting power but the mechanical load is jammed or the capacitor has failed. After a hurricane, the most common cause in Westgate is a slide gate that shifted on its rack, or a swing gate whose post moved out of plumb, binding the operator. The fix may be as simple as a capacitor or as involved as re-setting the post. We diagnose it on site and give you the written repair price before any work starts. Call (728) 203-2413 to schedule.
You need a motor and control board rated for coastal humidity. In Westgate, we recommend operators with sealed enclosures and boards that have conformal coating, which resists the corrosion that kills uncoated boards within a few years. Viking and DoorKing both make coastal-rated housing options. The motor itself doesn’t cost more for coastal duty, but the enclosure does. Expect $100 to $250 more for a properly sealed coastal install. Call (728) 203-2413 and we’ll point you to the right unit for your canal-front location.
It can be either. A surge that kills the keypad often damages the receiver board as well, but replacing both when only one failed is a common industry overcharge. We test the keypad with a known-good signal and test the board with a known-good keypad before quoting anything. The answer determines whether you’re paying $120 for a new keypad or $350 for a board. Call (728) 203-2413 for a free estimate and we’ll figure out which part actually failed.
What Makes Westgate Gate Motor Repair Different
Westgate’s canal-front soils shift with drainage patterns after afternoon thunderstorms, so gate limit switches and loop detectors on canal-side slide gates drift out of calibration more often than in inland Palm Beach County communities. We know this because we track every service call pattern across Westgate neighborhoods. A technician who’s never worked the canal streets sees a limit switch that needs a tweak. We see the post that moved, the drainage run that changed, and the thermal overload that’s about to kill the motor. Fixing the switch without fixing the post means you’re calling again in six weeks.
We got a call from a homeowner off Okeechobee Boulevard whose 1980s FAAC swing gate had stopped responding to the keypad. Our tech found the original control board had finally given out, and the hinge post had pulled 3 inches out of plumb from decades of canal-bank settling. We replaced the board with a current FAAC unit, performed sag correction on the post footing, and added a safety photocell the old install never had. The gate now meets UL 325 and swings true even after a downpour. That’s the difference between swapping a part and fixing the system.
If your gate motor is acting up in Westgate, call (728) 203-2413. A live person answers. We’ll give you a straight answer over the phone, a written price before any work starts, and a one-year guarantee on the repair. That’s The Garrison Standard, and it’s how we work every day.
Written by Lonnie Burke, Owner at Carver Gate Repair West Palm Beach, serving Westgate and surrounding Palm Beach County communities.