Ghost Controls Gate Repair Service Nationwide

Why West Palm Beach Homeowners Choose Ghost Controls Gate Repair

Ghost Controls service in West Palm Beach for gate repair typically runs $165 to $420 depending on whether we’re replacing a limit switch assembly, re-terminating solar leads, or swapping a failed arm. We’re an independent Ghost Controls service provider, not a manufacturer-authorized shop, which means we answer to you, not a warranty department. Our crew works on Ghost Controls openers across Palm Beach County every week, and the salt air here creates failure patterns you won’t find in a national troubleshooting guide.

Call (728) 203-2413

The coastal environment from El Cid to Palm Beach island accelerates corrosion on solar connectors, limit switches, and arm brackets in ways inland installers rarely see. Lonnie Burke, owner at Carver Gate Repair West Palm Beach, has spent years diagnosing exactly these failures. For Gate Repair, call (728) 203-2413 and a live person answers, 24 hours a day. Every Ghost Controls job starts with a written price before any work begins, and every repair carries our 365-Day Done Right Promise in writing.

Why Trust Carver Gate Repair West Palm Beach for Your Ghost Controls Gate Repair?

Ghost Controls builds solid residential operators, but their design assumptions don’t always account for West Palm Beach’s specific conditions. The TSS1XP and AXS1XP solar systems rely on clean panel output and protected connectors. Salt haze and afternoon thunderstorms work against both. Our technicians have pulled apart enough of these units to know exactly where they fail and why.

Lonnie Burke grew up in Los Angeles and learned welding and metal fabrication at Los Angeles Trade-Technical College before spending two decades working through every gate problem a Florida property can produce. He and the crew serve West Palm Beach regularly, including Northwood Hills, where older ornamental iron paired with newer automated systems keeps diagnostics interesting. Lonnie’s approach is simple: figure out what broke first. Everything else follows from that. That discipline means we don’t sell you a new board when a corroded connector is the actual problem.

We stock OEM Ghost Controls boards, arm assemblies, and solar panels locally for fast turnaround. For mechanical items like brackets, clevis pins, and gate hinges, we upgrade to marine-grade stainless aftermarket parts that outlast the factory zinc-plated hardware in coastal air. As an independent Ghost Controls service provider, we’re not bound by manufacturer repair protocols. We’re bound by what actually fixes your gate and keeps it working.

Common Ghost Controls Gate Repair Problems We Fix in West Palm Beach

• Limit switch drift on TSS1XP and TSS1 models. Storm surge and repeated wind loading push the gate past its normal travel, and the limit switch cam slips. The gate then stops short or over-travels past the closed position. In West Palm Beach, hurricane-force gusts make this the single most common Ghost Controls repair we perform. We replace the limit switch assembly and re-set travel limits to factory spec.
• Solar panel voltage sag from salt haze and corroded MC4 connectors. Ghost Controls AXS1 and AXS1XP systems depend on consistent panel output. Salt film builds on the panel glass, and the MC4 connectors corrode at the crimp. Output drops below what the control board needs, especially on cloudy days after a storm front. The gate beeps but won’t move, or moves sluggishly. We clean the panel, re-terminate the leads with adhesive-lined heat shrink, and verify output voltage under load.
• Receiver module desensitization from moisture intrusion around the antenna grommet. The antenna grommet on Ghost Controls receiver boards shrinks and cracks in Palm Beach County’s heat and humidity. Moisture wicks in, and remote range drops to under 20 feet. Owners assume the remote battery is dead and replace it, only to find the range still lousy. We reseal the grommet or replace the receiver module and restore full range.
• Arm bracket wallowing at the gate post on DTP1 dual arm installs. Stainless-to-galvanized thread galling during the original install creates a loose bracket that wallows out the mounting holes under repeated cycling. The arm develops play, and the gate bangs at the end of travel. We drill out the wallowed holes, install thread inserts, and re-mount the bracket with proper torque and anti-seize on the threads.
• Grinding noise from a failing arm gearbox followed by a stall. Ghost Controls VESL1 and DTP1 arms use a worm gear that wears unevenly when the gate is slightly out of alignment. The gear grinds, binds, and the arm shuts down on thermal overload. We diagnose whether the gearbox is salvageable or the arm needs replacement, and we re-align the gate on its hinge post so the new arm doesn’t wear the same way.

Ghost Controls Parts & Our Repair-vs-Replace Approach

We prefer OEM Ghost Controls boards, arm assemblies, and solar panels when a component needs replacing. OEM parts maintain the part’s own warranty and fit without modification. For simple mechanical items like brackets, clevis pins, and gate hinges, we use marine-grade stainless aftermarket parts. In West Palm Beach’s salt air, the factory zinc-plated hardware rusts within a season or two. Stainless lasts.

We replace a Ghost Controls arm or board rather than rebuild it when the shaft seals or conformal coating are compromised. Once salt air gets past the seal, the failure is internal and progressive. Rebuilding a corroded board is a short-term patch. A replacement arm with new seals is the honest fix. On the mechanical side, if the bracket is intact and the hinge post is sound, we repair. If the post itself is rusted through, no new arm will fix that, and we’ll tell you before quoting any work. Call (728) 203-2413 for a straight answer on repair versus replace, with a written price before anything gets opened up.

Our Ghost Controls Service Process – Step by Step

1. 1
   Diagnosis. We check solar panel output under load, test limit switch function, verify receiver range, and inspect arm brackets and gate alignment. A Ghost Controls gate that won’t move can be a dead battery, a corroded MC4 connector, a slipped limit cam, or a thermal fault. We find the actual cause before quoting anything.
2. 2
   Written price. Before any work starts, you get a written price for the repair. That number doesn’t move at the door. If the diagnosis reveals a second problem, we explain it and get your approval before doing anything extra.
3. 3
   Repair or replacement. We install OEM parts where it matters for warranty continuity, upgrade to marine-grade stainless hardware where the factory parts won’t survive West Palm Beach’s climate, and torque every fastener to spec with anti-seize on dissimilar metals.
4. 4
   Testing and realignment. We run the gate through full open/close cycles, set limit switches precisely, verify remote range from the street, and check that the gate seats correctly at both ends of travel. A gate that’s even slightly out of alignment eats arm gears.
5. 5
   Written guarantee. Every repair carries our 365-Day Done Right Promise in writing. If the same repair fails within a year, the second visit is free. No charge, no argument.

Ghost Controls Products We Service & Install in West Palm Beach

Our technicians work on the full residential Ghost Controls lineup: the TSS1 and TSS1XP heavy-duty solar swing gate opener kits, the AXS1 and AXS1XP residential solar automatic swing gate operators, the DTP1 dual swing gate opener kit, and the VESL1 low-voltage swing gate opener. We repair motors, add battery backup to existing solar openers, re-align gates that have sagged on their hinge posts, and install complete new Ghost Controls systems where the old operator is beyond saving. We stock common Ghost Controls boards, limit switch assemblies, and arm brackets locally in West Palm Beach so most repairs don’t wait on a parts shipment.

We Also Service These Brands

Ghost Controls is one of nine gate motor brands we work on. If your property has a LiftMaster on the driveway and a Ghost Controls on the side gate, one call covers both. We also provide Boynton Beach Ghost Controls service and service Mighty Mule and DoorKing systems across West Palm Beach, and our parts stock reflects that range. You’re not locked into a single-brand shop.

FAQs – Ghost Controls Gate Repair Service in West Palm Beach

Book Your Ghost Controls Service in West Palm Beach, FL

Call (728) 203-2413 and a real person answers, day or night. Tell us what your Ghost Controls gate is doing, or not doing, and we’ll schedule a visit with a written price before any work begins. Written guarantee on every repair. 365 days. That’s the Garrison Standard.

Written by Lonnie Burke, Owner at Carver Gate Repair West Palm Beach, serving West Palm Beach and Palm Beach County.