Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Lake Park
Gate installation in Lake Park most often means retrofitting a 1960s duplex gate or replacing a corroded swing gate on a 10th Street apartment building, and the job usually runs $1,900 to $4,800 depending on the gate type and operator. We dispatch crews to Lake Park daily from our South Florida office, and we know the town’s tight lots, mid-century housing stock, and salt-air corrosion patterns well enough to quote the job accurately the first time. Call (728) 203-2413 and a live person answers, day or night.
Most Lake Park homes and small apartment buildings were built between the 1950s and 1970s. That means the gates we install here rarely go onto fresh concrete and new wiring. They go onto posts that have been leaning for twenty years, into sandy soil that drains fast, and next to parking lots where tenants need their cars in and out. Our crew works to Lake Park with that in mind, not against it.
Why Carver Gate Repair West Palm Beach Is Lake Park’s Preferred Gate Installation Company
Homeowners and property managers in Lake Park call us because the crew shows up when they say they will, gives a written price before any work starts, and leaves the site clean. That is not marketing language. It is the Garrison Standard, and it has been the operating rule for every job since 2008. Lonnie Burke runs the West Palm Beach operation, and every technician who comes to a Lake Park job is background-checked and in uniform.
Lake Park customers deal with a specific problem: gates installed decades ago, before modern entrapment protection and operator sizing existed. We see original pull-chain slide gates on apartment buildings along 10th Street, chain-link swing gates patched with mismatched hardware after storms, and hinge posts cracked below grade. A generalist contractor sees a gate. We see the post footing, the track alignment, the control board placement, and the salt corrosion. That is the difference. Our reputation in Lake Park comes from fixing the root cause, not hanging a new panel on a bad post and walking away.
Styles & brands we work with





Automatic Gate Installation in Lake Park
Automatic Gate Installation in Lake Park typically means adding an operator and safety system to an existing gate, or replacing a manual gate with a new automated one. A basic single swing gate operator starts around $1,900 installed. A full automatic slide gate system for a small apartment building runs $3,200 to $4,800, including the operator, safety photocells, and a loop detector where the layout allows one. The price is written down before we start, and it does not move at the door.
Retrofitting Legacy Gates
An older gate on a Lake Park duplex rarely has the post footing or hinge reinforcement a modern operator demands. We check the post depth, the gate weight, and the track condition before any operator goes on. If the post is rotted or undersized, we cut it out and pour a new footing. Skipping that step is why so many new operators fail within months on 10th Street buildings.
New Construction and Full Replacements
When a gate is beyond retrofitting, we build the replacement to match the property. That means weather-sealed control boards, properly sized operators for the gate weight, and hardware rated for coastal humidity. We install swing and slide gates that open and close without scraping, and we set the loop detector depth correctly for Lake Park’s sandy, fast-draining soil.
Gate Installation Services in Lake Park
Gate Installation Services in Lake Park cover driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates. A simple chain-link driveway gate replacement starts around $1,200. A double swing gate for a duplex or small apartment building typically runs $2,500 to $4,200. A pedestrian gate with a keypad and electric strike starts around $1,800. Every quote is itemized and written before work begins.
Driveway and Security Gates
Most Lake Park driveways are narrow, and many lead to single-car parking pads behind duplexes. We install gates that swing or slide without eating into the tenant’s parking space. For security gates on apartment buildings, we wire the keypads, intercoms, and safety edges so the gate stops and reverses correctly every time.

Pedestrian and Double Gates
Pedestrian gates next to a driveway gate are common on Lake Park rental properties. We hang them square, sink the posts deep enough for the soil, and set the latch so it does not bind in the humidity. Double gates take more work because both leaves must meet evenly, and if one post leans even slightly, the whole gate sags. We fix the post first, then hang the gate.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lake Park
Our Lake Park crews install and service operators from FAAC, BFT, Linear, and Viking, along with several other major brands. That matters because a 1960s apartment building often has an old FAAC or BFT operator that needs a direct replacement, not a generic swap. We keep our technical documentation current across every brand we service, so the right parts and wiring diagrams are matched to the system already on the property. For Lake Park customers, that means fewer return trips and a faster install.
Common Gate Installation Problems We See in Lake Park Homes
- Rotted hinge posts on 1950s duplexes. The original post was often set in a shallow footing that has since cracked. We cut out the old post and pour a new footing before hanging anything on it.
- Salt-corroded panels and hinges. Lake Park’s coastal air eats unprotected metal fast. We use weather-sealed hardware and corrosion-resistant hinges on every new install near the water.
- Worn rack and pinion on old slide gates. The 1960s slide gates along 10th Street still run on original rack gear. A new operator on a worn track fails early, so we straighten or replace the track before installing the operator.
- Shallow loop detectors in sandy soil. Lake Park’s soil drains fast, and a loop set too shallow loses detection after heavy rain. We set the loop at the correct depth and seal the control board against afternoon thunderstorms.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Lake Park, FL
A chain-link driveway gate replacement in Lake Park typically runs $1,200 to $1,900. A single automatic swing gate with operator and safety system runs $1,900 to $2,800. A double swing gate for a duplex or small apartment building runs $2,500 to $4,200. A full automatic slide gate system runs $3,200 to $4,800. What moves the price is the post condition, the gate weight, the operator size, and whether the existing track can be reused. We give you a written quote before any work starts, and the number does not change at the door. Call (728) 203-2413 for a free estimate.
We Also Serve Cities Near Lake Park
Our crews cover Lake Park and the surrounding Palm Beach County communities, including West Palm Beach, Boynton Beach, Jupiter, and Greenacres. If you are near the Lake Park line, call us and we will confirm coverage. For more detail on what a gate job involves, see our Gate Installation page. We know this stretch of Florida well, and we quote honestly for it.
Serving Lake Park, FL - Our Local Coverage Area
We’re based in the Lake Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Lake Park
It depends on the post footings, the track condition, and the gate weight, but many of these legacy gates can be retrofitted. If the track is straight and the posts are sound, we can install a modern operator with a loop detector and safety photocells, often for $2,800 to $3,800. If the track is rusted or the posts are leaning, replacing the gate and operator together is usually the cheaper answer over two or three years. We will tell you which path makes sense before you spend a dollar. Call (728) 203-2413 and we will walk the property with you.
Yes, it does. The salt air and humidity between Lake Park and the coast corrode hinges, brackets, and control boards faster than inland locations. We use weather-sealed control enclosures and corrosion-resistant hardware on every Lake Park install. An operator mounted without sealed electronics will fail within two or three years here. We install for the specific conditions, not the generic Florida average.
We stage the work in sections and keep at least one access lane open the whole time. For a swing gate, we set the operator post and gate posts first, then hang the gate leaf, then run the power and safety components. The crew works in the corner of the lot, not across it. Tenants can come and go during the install. We have done this enough times on 10th Street properties to know the layouts, and we plan the job around the parking, not the other way around.
About half the sagging gates we see in Lake Park can be saved with a new hinge post footing and re-hung hinges. If the pipe frame is still straight and the chain-link fabric is intact, we can cut out the old post, pour a new footing, and re-hang the gate square. If the frame is bent or the hinges have ovaled out the pipe, a new gate is the better spend. A new chain-link driveway gate in Lake Park runs $1,200 to $1,900 installed, including the post work.
Yes, every automatic gate in Lake Park must comply with current entrapment protection standards, including safety photocells or contact edges and a properly adjusted operator force setting. These are not optional add-ons. We install them on every automatic gate job, and we test the reverse function before we leave. If you have an older operator without these protections, we will tell you, because it is a safety issue and a liability issue for any property owner.
Contact Carver Gate Repair West Palm Beach
If you need gate installation in Lake Park, call us at (728) 203-2413. We will talk through what you have, what it needs, and what it will cost, all before you commit to anything. Every job comes with a written price and the 365-Day Done Right Promise in writing. No voicemail trees, no call-back queues. A live person answers.
Written by Lonnie Burke, Owner at Carver Gate Repair West Palm Beach, operating to the Garrison Standard since 2008.