Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Jupiter
Gate repair in Jupiter, FL typically costs $185 – $640 depending on what failed, with most hinge, weld, and operator board repairs completed in a single visit. We answer the phone live at (728) 203-2413 and dispatch background-checked, uniformed technicians to Jupiter neighborhoods including Abacoa, Admiral’s Cove, and the Intracoastal corridor. If your gate won’t open, sags on its hinges, or stopped responding after a storm, call us and we’ll give you a written price before any work starts.
Why Carver Gate Repair West Palm Beach Is Jupiter’s Preferred Gate Repair Company
We operate under The Garrison Standard, which means every Jupiter repair includes a written price delivered before work begins, a full-year written guarantee, and a free second visit if the repair fails inside that window. Those aren’t add-ons. They’re the baseline.
Our Gate Repair team works exclusively on gates and motor systems. That focus matters in Jupiter, where a generalist contractor might not recognize the difference between a salt-corroded FAAC board and a lightning-damaged BFT board until the replacement part is already ordered wrong. Our technicians train on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment. Lonnie Burke leads the crew with a simple expectation: diagnose accurately, quote honestly, and leave the site as clean as it was when we arrived.
Response time to Jupiter is typically same-day or next-morning for non-emergency calls, and our phones are staffed by a live person 24 hours a day, seven days a week. When a gate fails at 11 p.m. and your driveway won’t open for the morning school run, that matters.
Styles & brands we work with
Gate Welding in Jupiter
Gate welding in Jupiter almost always means repairing steel and wrought-iron gates that have corroded from the inside out. Salt air works its way into hairline cracks, rusts the metal from within, and one day the gate snaps at a joint or drops at the hinge. A typical weld repair for a corroded driveway gate in Jupiter runs $220 – $480, depending on how much of the joint needs to be cut out and replaced with fresh steel.
Weld Rust Repair
We cut out the rotted section, weld in new steel, then coat the repair with a marine-grade rust inhibitor before repainting. On Jupiter gates, the critical step is treating the inside of the weld, not just the visible face. If the back side of a weld isn’t sealed, it starts rusting again within months.
Hinge & Post Repair
When a gate sags on one side, the hinge post is usually the culprit, not the hinge itself. Zinc-plated posts rust through at the base in Jupiter’s salt air within two to three years. We replace them with stainless hinge posts, often adding a sag correction bracket so the gate stays square instead of dragging on the driveway.
Commercial Gate Repair in Jupiter
Commercial gate repair in Jupiter serves gated communities, HOAs, and small business properties where a failed gate means residents can’t get in or a delivery truck blocks access. Typical commercial repairs in Jupiter run $340 – $780 for slide gate issues, $260 – $560 for swing gate operator failures, and $185 – $420 for loop detector replacement. Every commercial job gets a written price before we touch anything.
Slide Gate Operator and Loop Detector Failures
Slide gates in Jupiter’s gated communities fail in predictable ways: the loop detector stops sensing a car’s metal mass, the gate reverses for no reason, or the limit switch loses its position and the gate stops halfway. We troubleshoot the loop first, then the board, then the mechanical track, in that order. Replacing a loop detector in Jupiter usually runs $385 – $550 including the new detector and the saw-cut and seal work.
Scheduled Maintenance for HOAs
HOAs along Donald Ross Road and in communities like The Farms often schedule quarterly maintenance to stay ahead of corrosion. That work includes cleaning the operator housing, testing the safety edges, and checking the battery backup before hurricane season. A basic quarterly maintenance visit in Jupiter runs $145 – $220 per gate.
Trusted Brands We Service in Jupiter
We carry parts for FAAC, BFT, and Viking operators, which covers a large share of the automated gates across Jupiter, and we stock surge-protected control boards for all three. Because we only work on gates, our techs keep the specific limit switches, loop detectors, and arm assemblies in the van that these systems need, not whatever a generalist happens to have left over from the last job. For Jupiter homeowners, that means one trip instead of two and a repair that stays repaired through the next storm season.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Jupiter Homes
- Salt-corroded operator boards near the Intracoastal. The circuit board inside the operator housing corrodes from salt exposure within two to three years on homes along the Intracoastal Waterway. We replace the board and seal the operator housing against further salt intrusion.
- Lightning-strike control board failures in Abacoa and The Farms. Summer thunderstorms send voltage spikes through the low-voltage control wiring, killing the board even when there’s no direct strike. A surge suppressor on the incoming power line is cheap insurance and we install one on most Jupiter jobs.
- Sagging gates from rusted hinge posts. The gate itself might be fine but the post is rotted at the base, so the gate drops and drags on the driveway. Cutting out the old post, setting a stainless replacement, and adding a sag correction bracket stops the drag.
- Photoelectric sensor drift from wind and vibration. Coastal wind pushes gate panels against the sensor alignment, so the gate stops halfway or reverses. We realign the sensors, then anchor the sensor housings so wind doesn’t knock them loose again.
Pricing for Gate Repair in Jupiter, FL
Most gate repairs in Jupiter fall between $185 and $640. Here’s what we see day to day: hinge and post repair runs $220 – $480, weld rust repair runs $220 – $480, operator board replacement runs $260 – $560 depending on brand, and loop detector replacement runs $385 – $550. Full operator replacement on a swing gate typically runs $640 – $1,200 installed. Your written price is set before any work starts, and it doesn’t move at the door. Call (728) 203-2413 and we’ll quote your specific gate over the phone if we can, or schedule a free on-site estimate if we need to see it.
We Also Serve Cities Near Jupiter
Our Jupiter crew also covers North Palm Beach, West Palm Beach, Palm Beach, and Royal Palm Beach. If you’re on the border of one of those cities, call us and we’ll confirm we can reach you. Same written price, same one-year guarantee, same live person answering the phone.
Serving Jupiter, FL - Our Local Coverage Area
We’re based in the Jupiter area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Jupiter
Lightning strikes several miles away send voltage spikes through power and low-voltage control lines. Those spikes jump across the operator board and fry the microprocessor or the relay. Abacoa and The Farms get hit harder than the Intracoastal neighborhoods, and we install surge suppressors on most Jupiter operator repairs to stop it from happening again. Call (728) 203-2413 and we’ll tell you whether your board needs replacing or if a surge suppressor is the only fix.
Usually the post. Zinc-plated hinge posts rust through at the base in Jupiter’s salt air within two to three years, even when the gate panel itself still looks okay. We replace the post with a stainless hinge post and add a sag correction bracket. In Admiral’s Cove recently, our tech found exactly that: good gate, rotted post, and a LiftMaster operator that failed from a surge in the same storm. We fixed both in one visit. Call (728) 203-2413 for a free on-site look.
Galvanized steel with a marine-grade powder coat, or stainless hardware throughout. Painted steel alone won’t last on the coast, the salt gets under the paint at every screw hole and weld. If you’re replacing a gate in Jupiter, we’ll quote galvanized or aluminum for the panel and stainless for every hinge, bolt, and post. Your written price includes the material upgrade, not just the labor. Call (728) 203-2413 and we’ll walk you through the material choice before you spend anything.
That’s almost always a loop detector or limit switch problem, not the motor. The loop detector may have shifted in its saw-cut and lost its sensitivity to your car’s metal, or the limit switch has drifted out of position. We test the loop first, then the switch, then the board. Most driveway slide gates in Jupiter communities like The Farms can be fixed the same day once we diagnose it. Call (728) 203-2413 and we’ll schedule the visit and quote the most likely parts up front.
Yes. A solar conversion on a Jupiter gate includes a panel sized for the operator’s power draw, a marine-grade battery, and a sealed charge controller. We’ve done this for homeowners near the Intracoastal whose transformers corroded from salt exposure, and it removes the most salt-vulnerable part of the system. The conversion typically runs $540 – $890 depending on the operator and battery capacity. Call (728) 203-2413 and we’ll tell you if your operator is a good candidate for solar before you commit.
Written by Lonnie Burke, Owner at Carver Gate Repair West Palm Beach, serving Jupiter, FL.