Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for West Palm Beach Homeowners
A gate that won’t open or close isn’t just a headache - our Automatic Gate Repair service fixes it fast. It’s a security problem and a daily inconvenience rolled into one. For homeowners and property managers across West Palm Beach, we handle it the same day you call. Carver Gate Repair West Palm Beach has been operating to The Garrison Standard since 2008, and our technicians arrive background-checked, uniformed, and ready with the right parts on the truck. No gate is too heavy, too old, or too specialized. We service nine gate-motor brands, including Elite, LiftMaster, and FAAC, and we do it with written pricing before any work starts. Call (728) 203-2413 for a free estimate.
Driveway Gate Repair
Electric Gate Repair covers the gate system that protects your vehicle entrance, from the physical gate leaf to the operator, track, and safety sensors. You need it when the gate hesitates, reverses for no reason, grinds against the track, or stops responding to the remote entirely. Carver Gate Repair West Palm Beach troubleshoots the full system rather than replacing parts on a hunch. A typical driveway gate repair in West Palm Beach runs between $150 and $450, depending on whether we’re adjusting a limit switch, replacing a worn roller, or rebuilding a swing arm assembly. The written price comes before any wrench turns, so the number doesn’t move at the door.
Common Driveway Gate Faults
We see two issues more than anything else in West Palm Beach. First, limit switches drift out of adjustment in the humid, salty air, so the gate over-travels and slams into the post. Second, photo-eye sensors get caked with dust and pollen during the dry season, causing phantom reversals. Our technicians calibrate and test both during every repair call.
When Replacement Beats Repair
If the gate leaf itself is rusted through at the hinge points or the operator motor is over 12 years old and eating capacitors, we’ll tell you straight. We don’t rebuild equipment that’s past its service life just to generate a return trip. You get an honest recommendation and a written quote for the full replacement if that’s the better path.
Styles & brands we work with
Gate Welding
Gate Welding is the structural repair of a metal gate’s frame, hinges, or decorative elements using heat and filler metal. You need it when a hinge tears loose from the post, a weld cracks along the frame, or corrosion has eaten through a bottom rail. Carver Gate Repair West Palm Beach performs on-site welding for steel, aluminum, and ornamental iron gates, and our welders are trained to match weld profiles so the repair blends with the original fabrication. Basic Gate Welding in the West Palm Beach area starts around $125 for a single hinge re-weld and runs up to $600 or more for extensive frame reconstruction. We quote the job after seeing the damage, and that quote is in writing before we strike an arc.
Structural Hinge Repair
Hinges carry the full weight of the gate every time it swings. When a hinge weld fails, the gate drops, scrapes the ground, and puts stress on the operator - that’s when Hinge & Post Repair is critical. We cut out the old weld, clean the base metal, and re-weld with proper penetration, then re-hang the gate and verify the swing clearance.
Corrosion Repair on Coastal Properties
Homes near Palm Beach and Lake Worth deal with salt air that accelerates rust on ornamental iron. We grind back the affected area, weld in new material where the steel has thinned, and apply a rust-inhibiting primer before finish paint. The goal is a repair that lasts, not a patch that rusts through in six months.
Commercial Gate Repair
Commercial Gate Repair handles the heavier, high-cycle gate systems at condominium communities, office parks, warehouses, and retail centers in the West Palm Beach metro. These gates cycle dozens or hundreds of times per day, which means every component wears faster and failures compound quickly. Carver Gate Repair West Palm Beach dispatches technicians trained on commercial operators, loop detectors, and access control integration. Commercial gate repair pricing in West Palm Beach typically runs from $250 for a service call and minor adjustment to $900 or more for operator replacement or loop detector replacement. Same-day service is available for emergencies, and the written guarantee applies to commercial work exactly as it does to residential.
Loop Detector Diagnostics
A loop detector is the buried wire that senses a vehicle and tells the gate to open or stay open. When it fails, the gate won’t recognize cars, or it closes on vehicles mid-passage. We test loop frequency and continuity on site, identify whether the loop or the detector board is at fault, and replace only what’s actually failed.
Access Control and Operator Coordination
Many commercial gates in Palm Beach and Riviera Beach tie into keypad, card reader, or phone-based access systems. We coordinate the gate operator’s control board with the access system so the gate opens on command and holds open safely. If your gate is integrated with a security provider’s system, we work with them directly.
Iron Gate Repair
Iron Gate Repair addresses damage to solid or hollow iron gates, including bent pickets, broken scrollwork, sagging frames, and hinge failures. Iron gates are common on older West Palm Beach properties and in historic neighborhoods like Westgate and Lake Park, where original ironwork deserves to be repaired, not scrapped. We straighten, weld, reinforce, and re-hang iron gates on site. Typical iron gate repair in the West Palm Beach area costs between $180 and $550, with the higher end reserved for reconstructing decorative elements or correcting years of sag. Every repair carries our written guarantee for a full year.
Straightening and Frame Reinforcing
Iron gates sag when the frame was undersized for the span or when years of use have fatigued the corner joints. We use hydraulic straightening and add gusset plates where needed, then re-weld the corners and check that the gate hangs square. The repair is structural, not cosmetic.
Decorative Element Restoration
Scrolls, finials, and cast iron details break over time, especially on gates that face the afternoon heat and morning salt air near the Intracoastal. We source or fabricate matching pieces, weld them in place, and finish to match the existing patina as closely as practical. The result is a gate that looks like it was never damaged.
Sliding Gate Repair
Sliding Gate Repair covers cantilever, V-track, and wheeled sliding gates that move horizontally instead of swinging. You need it - and often need Gate Realignment - when the gate binds mid-travel, jumps the track, grinds, or the motor strains without moving the gate far enough to trigger the limit. Carver Gate Repair West Palm Beach works on sliding gates at single-family homes, ranches, and commercial properties throughout the county. Sliding gate repair in West Palm Beach typically runs from $175 for roller or track cleaning and adjustment to $500 or more for replacement of carrier wheels, track sections, or the chain drive. The written price is set before work begins, and the number doesn’t change.
Track and Carrier Adjustments
Most sliding gate problems trace back to the track, the carrier wheels, or the guide rollers. We check the track for level, clean out debris and corrosion, replace worn carrier wheels, and adjust the guide rollers so the gate travels smoothly without wobble. A small adjustment often prevents a much larger failure later.
Chain and Drive System Service
The chain or rack that moves a sliding gate stretches and wears over time. When it skips teeth or slips, the gate jerks and the motor overloads. We inspect the chain tension, replace stretched links or damaged rack sections, and verify the motor draws normal amperage after the repair.
Wrought Iron Gate Repair
Wrought Iron Gate Repair focuses on the ornamental, hand-forged style gates that are common on older Palm Beach homes and estate properties. These gates are valuable, often custom, and worth repairing properly rather than replacing with machine-made panels. Carver Gate Repair West Palm Beach restores wrought iron gates using welding, straightening, and finish matching. Pricing for wrought iron gate repair in West Palm Beach typically falls between $200 and $700, depending on the complexity of the scrollwork and the extent of rust damage. We treat these repairs with the care the craftsmanship deserves.
Rust Treatment and Prevention
Wrought iron in coastal Palm Beach County rusts from the inside out, especially where moisture sits in joint pockets and decorative details. We grind, treat, and prime before finish coating, and we’ll point out areas likely to rust again so you can plan ahead. The repair address the current damage and slows the next one.
Matching Custom Fabrication
When a section of scrollwork is too far gone to repair, we fabricate a replacement piece to match the existing pattern. Our welders work from the original geometry and finish the new work to blend with the old. You get the gate back whole, not patched with something off a shelf.
Metal Gate Repair
Metal Gate Repair is the broad category that covers steel, aluminum, and other non-wood gate leafs, including tube-frame, picket, and panel gates. You need it when any metal gate stops swinging or sliding properly, when metal has torn at the hinges, or when the gate frame has bent from impact. Carver Gate Repair West Palm Beach works on all metal gate types, and our trucks are stocked with common hardware, rollers, and repair materials matched to the brands we service. Metal gate repair pricing in West Palm Beach generally runs from $140 for minor hinge or latch repairs to $500 for structural straightening or re-welding. Your written price comes before any work begins.
Aluminum Gate Specifics
Aluminum gates are lighter than iron but prone to hinge tearing because the softer metal fatigues with use. We weld or re-plate the hinge area and often add a backing plate to distribute the load. The repair works with the metal’s properties instead of against them.
Impact and Vehicle Damage
When a car clips a gate, the damage is rarely just the visible dent. We check the frame for twist, the hinges for stress, and the operator for overload before we quote the repair. You get a full picture of what’s damaged, not just what’s obvious.
Wood Gate Repair
Wood Gate Repair covers solid and frame-style wood gates, including the boards, stiles, rails, hardware, and the post the gate hangs from. You need it when the gate sags until it drags, the wood splits around hinge screws, or the post has rotted below grade. Carver Gate Repair West Palm Beach repairs wood gates throughout West Palm Beach, including older neighborhoods where wood fencing and gates are original to the property. Wood gate repair in the area typically costs between $120 and $400, depending on whether we’re replacing hardware, re-hanging the gate, or rebuilding the frame. The price is written before any work, so there’s no surprise at the end.
Post Replacement and Reinforcement
The post is the most common failure point on wood gates in Palm Beach County. Moisture sits at the base, rot sets in, and the post eventually leans or snaps. We dig out the old post, set a new pressure-treated post in concrete, and re-hang the gate so it swings true. The concrete cures before we put full weight on the hinge.
Hardware Upgrades on Wood Gates
Many wood gate problems come down to hardware that was undersized from the start. We replace thin hinges with heavier strap hinges, add a diagonal brace if the frame lacks one, and install a latch that holds the gate closed under wind load. The repairs extend the life of the gate itself.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
Our technicians work on LiftMaster gate operators more than any other brand in this market. We’ve serviced hundreds of LiftMaster swing and slide operators in West Palm Beach and keep their common control boards, sensors, and remotes stocked on our trucks. When we walk up to a LiftMaster system, we already know the diagnostics menu, the wiring layout, and the parts that typically fail at certain ages.
FAAC operators are common on high-end residential gates in Palm Beach and Jupiter, and they require specific hydraulic and electromechanical knowledge. We service FAAC swing and slide operators with factory-diagnostic procedures, not guesswork. We also maintain Mighty Mule and Elite units, which appear frequently on DIY-installed and mid-range gated properties. Whether you have LiftMaster, FAAC, Mighty Mule, Elite, or any other make, we can diagnose it and quote the repair in writing before we start.
Signs You Need a Pro Right Now
- The gate reverses or stops mid-travel. This usually means a safety sensor is misaligned, a limit switch has drifted, or the motor is overloading. Left unaddressed, a gate that reverses erratically can damage the operator, the chain, or the gate frame.
- The motor hums but the gate doesn’t move. That hum is the motor trying to work against a mechanical bind, a failed capacitor, or a stripped gear. Running it this way burns out motors fast. The right fix starts with a diagnosis of where the resistance is coming from.
- The gate scrapes the ground or the track. This points to hinge wear, a bent frame, a rotted post, or misaligned rollers. A dragging gate works the operator harder every cycle, which shortens its life and inflates the eventual repair bill.
- You hear grinding, squealing, or popping during operation. Grinding is usually metal-on-metal contact from a failed bearing or roller. Popping often signals a chain jumping a sprocket or a hinge binding. These sounds don’t improve on their own.
- The gate won’t close all the way and stays open at night. An open gate is a security problem for your property, your vehicles, and anything stored behind it. West Palm Beach homeowners who rely on a gate for privacy need it closing consistently, and a gate that won’t seat is a repair we treat as a same-day priority.
Our Process, Step by Step
- 1
You call, a person answers. Our phones are staffed by a live person 24 hours a day, every day of the year, including weekends and holidays. You describe the problem, we schedule a time that works, and we give you a straight answer about what to expect.
- 2
A uniformed technician arrives. Every technician is background-checked, uniformed, and driving a marked Carver Gate Repair vehicle. You know exactly who’s walking onto your property before they ring the bell.
- 3
We diagnose the full system. We test the operator, the safety sensors, the limit switches, the hinges, the track, and the gate hardware. We use diagnostic tools including amp meters and multi-meter tests to isolate electrical faults from mechanical ones, so we’re not replacing parts to rule things out.
- 4
You receive a written price. Before any work starts, you get the repair scope and the total price in writing. The number doesn’t move at the door, and you approve it before we touch anything. That’s The Garrison Standard, and it’s non-negotiable.
- 5
The repair is done, tested, and guaranteed. We repair the gate, run it through multiple cycles, and show you what was fixed. Every repair carries our written guarantee for a full year. If the same repair fails inside that year, the second visit is free. No charge, no argument.
How Much Does Gate Repair Cost in West Palm Beach?
A typical gate repair in West Palm Beach runs between $150 and $450. Minor fixes like limit switch adjustments, sensor realignment, or hinge tightening sit at the lower end. Structural welding, track replacement, or motor replacement pushes toward the higher end. Full operator replacement on a high-end swing or slide gate can reach $1,200, but that’s a replacement job, not a repair. What affects the price most is whether the failure is mechanical or electrical, how far the technician has to travel, and whether specialized parts need to be ordered. We stock common parts for LiftMaster, FAAC, Mighty Mule, and Elite units on our trucks, which means many repairs finish in one visit without a parts delay. To avoid overpaying, get a written quote that separates parts from labor and watch out for contractors who quote low and add charges after the gate is apart. Our free estimate includes a full diagnostic of the system, a written price, and a clear explanation of what’s being repaired and why.
Our Service Area Near West Palm Beach
Carver Gate Repair West Palm Beach serves the city and the surrounding communities, including Gate Repair in Boynton Beach, Gate Repair in Jupiter, Greenacres, Riviera Beach, Palm Beach, Lake Park, Westgate, Palm Springs, Lake Worth, North Palm Beach, and Lantana. Most calls in the immediate West Palm Beach metro receive same-day service. Properties on the north end near North Palm Beach and Jupiter are typically reached within the same day as well. To see what we cover more broadly, visit our home page or the dedicated Gate Repair in West Palm Beach service area page.
Serving West Palm Beach, FL - Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in West Palm Beach
Gate repair is the process of diagnosing and fixing a gate system that has stopped working properly, whether the problem is mechanical, electrical, or structural. It covers the gate leaf, the hinges or rollers, the track if there is one, the motor or operator, the safety sensors, and the control systems. In West Palm Beach, gate repair commonly addresses issues caused by humidity, salt air, heavy use, and impact damage from vehicles. Most repairs complete the same day we arrive.
Most gate repairs in West Palm Beach finish in one to two hours on site, not counting parts that have to be fabricated or ordered. A limit switch adjustment, sensor realignment, or hinge replacement is usually under an hour of labor. Structural work like welding and frame straightening takes one to three hours depending on the damage. We give you a time estimate with the written price before work begins.
Most gate repairs in the West Palm Beach area run between $150 and $450, with welding and more complex structural work starting around $500. The factors that move the price are the type of gate, the extent of the damage, and whether parts are on hand or need to be ordered. You’ll receive a written price before any work starts, and that price includes the diagnostic we just performed. Estimates are free, so call (728) 203-2413 for an exact quote on your gate.
Yes. LiftMaster is one of the most common brands we repair in West Palm Beach. Our technicians are trained on LiftMaster swing and slide operators, and our trucks carry the common control boards, sensors, and remotes these units need. We also service FAAC, Mighty Mule, Elite, BFT, Linear, Viking, Ghost Controls, and DoorKing equipment.
Yes. Our phones are answered by a live person 24 hours a day, every day of the year, and we offer same-day dispatch for urgent repairs in the West Palm Beach area. An open or stuck gate is a security issue and we treat it that way. Call (728) 203-2413 any time and you’ll speak to a person, not a voicemail box.
Every repair carries a written guarantee for a full year from the date of service, as part of our 365-Day Done Right Promise. If the same repair fails inside that window, we return and fix it at no charge. The guarantee is in writing on every invoice, not just spoken. If you’re comparing gate repair companies in West Palm Beach, ask what their guarantee actually says in the paperwork.
Clear the area around the gate so the technician has room to work, and if the gate is automated, have the remote or access code ready for testing. Move any vehicles that block access to the gate leaf or the motor. If the gate is wired into an access control system, have the master code or the security provider’s contact available. You don’t need to be home for the whole visit, but plan to be there when we arrive so we can show you the diagnosis and the written price before work begins.
Schedule Your Gate Repair Service in West Palm Beach Today
Call (728) 203-2413 for a free estimate on gate repair in West Palm Beach. A live person answers around the clock, every day of the year. You’ll get a written price before any work starts, a background-checked technician at your gate, and a repair guaranteed in writing for a full year.
Written by Lonnie Burke, Owner at Carver Gate Repair West Palm Beach, serving West Palm Beach since 2008.