Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across North Palm Beach
Gate installation in North Palm Beach runs $1,800 to $9,500 for most residential projects, depending on the gate type, operator, and whether we’re replacing an existing system or starting from new posts. A basic single swing gate with a new operator typically lands between $2,400 and $4,200. We’re the crew that shows up when we say we will, hands you a written price before any work starts, and stands behind the install for a full year. If you’re in North Palm Beach and need a driveway gate, pedestrian gate, or full motor system installed, call us at (728) 203-2413 and a real person picks up, day or night.
The salt air off the Intracoastal changes what gate hardware survives here. We see it every week along Lighthouse Drive, the Country Club neighborhoods, and the waterfront stretches west of US-1. What works inland in Royal Palm Beach or Jupiter farms fails faster within sight of the water. We spec corrosion-resistant hardware, galvanized post footings, and operators built for coastal wind loads. Not because it sounds good on a brochure. Because we’ve pulled rusted hinge posts out of the ground in North Palm Beach that had no business being there in the first place.
Why Carver Gate Repair West Palm Beach Is North Palm Beach’s Preferred Gate Installation Company
We work exclusively on gates and gate motor systems. That’s the whole trade. Lonnie Burke runs our West Palm Beach operation, and every tech on the truck is background-checked, uniformed, and trained on nine motor brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When you call, the person who answers already knows the difference between a limit switch and a loop detector. You won’t get a dispatcher reading from a script.
North Palm Beach homeowners have told us the same story over and over: a general contractor quoted one number, the gate tech showed up late, and the final invoice didn’t match the first. That’s the exact pattern The Garrison Standard was built to eliminate, and it’s been operating since 2008 through the Garrison Partners family. Every install starts with a written price delivered before any work begins. Every repair carries a written 365-Day Done Right Promise. If something fails inside that year, we come back at no charge. That guarantee is in writing, not implied.
Response time to North Palm Beach is typically 60 to 90 minutes for urgent repair calls, though installation work is scheduled and measured properly. We don’t rush a new gate into crooked posts to make a dispatch number look good. Installation jobs get a free measure, a written price, and a scheduled install window. Emergency calls get a real person on the phone at 2 a.m. and a tech dispatched from our South Florida office.
Styles & brands we work with
Sliding Gate Installation in North Palm Beach
Sliding gate installation in North Palm Beach is the right answer for properties where a swing gate would block part of the driveway or where the approach is too tight for a gate to arc outward. It’s common on the narrower lots in the 1970s subdivisions off Prosperity Farms Road, and on estates where the driveway runs parallel to the house. A sliding gate hangs on a steel track and rolls on rollers, which means the footing and the rack matter as much as the motor. In salt air, a standard zinc rack corrodes within years. We spec coated or stainless rack and pinion systems, and we set posts deeper than the original installations we tear out.
What a sliding gate install involves here: setting two end posts and the gate track, hanging the gate panel, mounting the operator, then wiring the safety sensors and the control board. If the property has an existing gate, we run new conduit rather than splicing into old wire. Most North Palm Beach sliding gate installations run $3,200 to $7,500, depending on gate width, automation, and whether we need a new concrete pad. A 20-foot sliding gate with a Viking or Ghost Controls operator on a new concrete base typically lands in the $5,000 to $6,800 range.
Track and Rack Replacement
Many North Palm Beach sliding gates fail not because the motor dies but because the track rusts or the rack teeth strip. Salt spray accelerates this. If the gate jumps off the rack after a storm, the rack is usually the culprit, not the motor. We replace the full run of rack and set the rollers true before we touch the operator. It’s the difference between a gate that works for five years and one that derails again by next hurricane season.
Sliding Gate Motor Retrofit
If your sliding gate manual operator still works but the motor has failed, we can often retrofit a new operator onto the existing gate. That said, we’ll tell you honestly when the old track isn’t worth saving. A retrofit operator install in North Palm Beach runs $1,800 to $3,900, depending on brand and whether we need to upgrade the safety sensor loop. We don’t patch a dead motor onto a rusted track and call it done.
Gate Opener Installation in North Palm Beach
Gate opener installation in North Palm Beach is one of the most common jobs we do, and for a specific reason: the area’s original late-1970s and 1980s-era operators are reaching the end of their service life. The control boards inside those units were never designed for Florida lightning density. A single close strike on the Intracoastal can take out a 1980s FAAC board and leave a gate dead. The question is whether to retrofit or replace. We’ll walk you through it in plain terms.
A basic gate opener installation on an existing swing or sliding gate runs $1,600 to $4,400 in North Palm Beach, including the operator, new safety photocells, and labor. If we’re replacing an obsolete unit with a modern LiftMaster or DoorKing operator, add $300 to $600 for the new controller and safety loop wiring. The real cost driver is whether the old gate hardware is worth keeping. On the 1980s gates we see along Lighthouse Drive and in the Country Club neighborhoods, the answer is often no: the hinge post has rusted at the base, or the gate itself is sagging and dragging on the opener.
Retrofit vs. Replacement
A retrofit makes sense when the gate panel and hinge posts are structurally sound, and the only failure is the control board or motor. We pull the old operator, mount the new one, and wire the safety sensors to current UL 325 code. A replacement makes sense when the post is compromised, the gate is rusted through, or the existing panel never met modern safety spacing rules. The retrofit saves money up front. The replacement is often cheaper over five years.
Hurricane-Rated Operators
North Palm Beach sits in a high-wind zone, and a gate that swings free in a hurricane becomes a missile. We install operators rated for coastal wind loads and add surge protection on every new board. A surge protector is a $75 to $150 add-on that saves a $600 control board the first time lightning hits a transformer on Prosperity Farms Road.
Trusted Brands We Service in North Palm Beach
We install and service Viking, DoorKing, and Ghost Controls systems, along with LiftMaster, FAAC, BFT, Linear, and Elite. The brand matters less than the install. We stock common control boards, safety photocells, and remote transmitters for the nine brands we service, so we’re not waiting on a distributor when your gate goes down. For North Palm Beach customers, that means a same-week installation schedule rather than a three-week parts delay. If your existing operator is from a brand we don’t carry, we’ll tell you before we quote the job, not after.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in North Palm Beach Homes
These are the failures we find most often when we arrive for an install estimate in North Palm Beach. If any of these sound familiar, the gate likely needs more than a motor swap.
- Obsolete 1980s control boards shorted after lightning. The boards were never designed for Florida’s summer storm density. You’ll hear a click when you press the remote, or nothing at all. A retrofit with a modern controller and surge protection is the fix.
- Rusted hinge posts at the base, especially near the Intracoastal. Salt spray eats the post from the bottom up. The gate sags, drags, and eventually the opener burns out trying to move it. We set new galvanized posts and pour deeper footings.
- Rack and pinion tracks corroded beyond salvage. Once the teeth strip or the rail pits, the gate derails. A new motor won’t fix a stripped rack. We replace the rack, set the rollers, and then mount the operator.
- Undersized post footings that shift under storm wind. Original installations in North Palm Beach frequently used shallow footings. Hurricane-force gusts crack the concrete, the post moves, and the gate binds or misaligns. We set posts at code depth with proper reinforcement.
Pricing for Gate Installation in North Palm Beach, FL
Here’s what we quote in the North Palm Beach market, as of 2026. These are real numbers from our written estimates, not an online calculator.
- Single swing gate with operator: $2,400 to $4,200
- Double swing gate with two operators: $4,800 to $8,500
- Sliding gate (20-foot panel) with operator and new concrete base: $5,000 to $6,800
- Pedestrian gate with keypad and magnetic lock: $1,800 to $3,200
- Gate opener retrofit on existing gate: $1,600 to $4,400
- Full security gate with intercom and camera integration: $7,000 to $9,500+
What moves the price: gate width, whether we’re setting new posts or reusing existing ones, whether you want battery backup for hurricane season, and how far the conduit run goes from the house to the gate. We deliver a written price before any work starts. That number does not move at the door. If we find rot or a damaged footer during the install, we stop, show you what we found, and give you a revised written price before we touch it. Call (728) 203-2413 for a free measure and estimate. Gate Installation is all our team does, and we’ll tell you exactly what the job costs before we schedule it.
One honest note on cost comparisons: gate installation in North Palm Beach runs 10 to 15 percent higher than inland cities like Royal Palm Beach because of the materials required. We don’t install untreated steel posts within a mile of saltwater. The galvanized and coated hardware we spec costs more up front and fails less. If someone quotes you significantly less for a waterfront property, ask what they’re putting in the ground.
We Also Serve Cities Near North Palm Beach
Our crews serve North Palm Beach and the surrounding communities along the Intracoastal and east of I-95. We also provide gate installation in Palm Beach, West Palm Beach, Jupiter, and Royal Palm Beach. If your property sits on a barrier island or along the waterway, the same salt-air and wind-load standards apply regardless of the city line. We quote every job the same way: a free measure, a written price, and a one-year written guarantee.
Serving North Palm Beach, FL - Our Local Coverage Area
We’re based in the North Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in North Palm Beach
Yes, most 1980s-era openers can be retrofitted with modern UL 325 safety photocells and a new control board, as long as the gate panel and posts are structurally sound. On a waterfront property along Lighthouse Drive or the Intracoastal, we’ve also added surge protectors to 1980s-era FAAC units to prevent repeat lightning damage. But if the hinge post is rusted or the gate sags, a retrofit buys you another failure in a year or two. We’ll measure the gate, inspect the post, and tell you which path costs less over five years. Call (728) 203-2413 for a straight answer and a free measure.
Salt air in North Palm Beach corrodes the hinge post from the base upward, where moisture collects and the galvanized coating fails first. You’ll see rust staining at ground level, then the post starts leaning under the gate’s weight, then the gate drags and the opener strains. On a waterfront estate along Lighthouse Drive, we replaced a 1980s FAAC operator after a lightning strike, only to find the original hinge post rusted through at its base. We set a new galvanized post footing, swapped in a LiftMaster operator with UL 325 photocells, and added a surge protector. The post is the foundation. When it goes, everything bolted to it fails too.
If you live east of US-1 or within a mile of the Intracoastal, yes, you should have an operator rated for coastal wind loads and a gate that locks mechanically when closed. North Palm Beach building code doesn’t explicitly require a “hurricane-rated” label on every residential gate operator, but it does require structures to withstand the wind loads mapped for the coastal zone. A gate that swings loose in a storm can damage your property and your neighbor’s. We spec operators with wind-load ratings matched to your exposure and add battery backup if you want the gate operational after the power drops.
Almost always the rack or the track, not the motor. In North Palm Beach, salt spray pits the rack teeth and the v-track, and once the surface corrodes, the gate wheel can’t seat properly. A strong wind gust pops it off the rail. The motor keeps running, which is why it sounds fine but the gate is stuck halfway. We replace the full rack run, set the guide rollers, and only then check the operator for damage. If the track is too far gone, we’ll tell you before we quote the motor work.
Every new gate installation we do in North Palm Beach includes UL 325 compliant photo eye sensors and edge sensors, wired to the operator’s controller. Photocells detect something in the gate’s path and reverse the direction. Edge sensors on the gate panel itself stop and reverse on contact. These aren’t optional add-ons; they’re the code minimum for any automated gate we install, and they’re included in every written price. If your current gate predates these requirements, we can retrofit them along with the new operator.
If you’re ready to replace an old gate or automate an existing one, call us at (728) 203-2413. We’ll schedule a free measure, give you a written price, and install the gate on the schedule we agree on. There’s a live person on the phone 24/7.
Written by Lonnie Burke, Owner at Carver Gate Repair West Palm Beach, serving North Palm Beach and the surrounding coastal communities.