Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in North Palm Beach, FL
Carver Gate Repair handles gate work across North Palm Beach from the first call to the final test cycle. This is barrier-island and Intracoastal territory: salt air moves through gate hinges, tracks, and control boards year-round, and hurricane season puts real wind load on every swing and slide system. We quote a written price before the work starts, and the guarantee is on paper for a full year. Call (728) 203-2413 and a live person answers, day or night.
Why North Palm Beach Homes Are Different
North Palm Beach has two separate conditions working against gate hardware. The first is the salt. Homes along Lighthouse Drive, the Country Club neighborhoods, and anything east of US-1 sit close enough to the Intracoastal or the ocean that airborne salt settles on hinges, tracks, operator arms, and exposed circuit boards. Galvanized steel that would last ten years inland will show rust bloom in three here unless it was specified for marine exposure. We replace with corrosion-resistant hardware as standard on North Palm Beach jobs, because anything less fails on the next tide cycle.
The second is inventory age. A large share of North Palm Beach’s gated homes were built between the 1970s and the 1990s, and many still run the original gate operator. Those control boards are now obsolete, and the failure pattern is predictable: a summer lightning storm near the Intracoastal, a dead board, and a gate stuck half-open. We stock retrofit kits and current-brand replacements so a lead-time problem does not leave a North Palm Beach driveway unsecured for a week.
Styles & brands we work with
Our Main North Palm Beach Services
Most calls from North Palm Beach come in for two reasons: a gate that stopped working, and a motor that stopped listening. These are the three services we route to their own pages below.
Gate Repair in North Palm Beach
North Palm Beach gate repair usually starts with rust, a storm, or both. Hinges bind on corroded posts, slide gates drag on worn rollers packed with sand, and welded frames crack at the stress points after a few seasons of coastal wind. We identify the failed part, quote the repair in writing, and complete the job the same visit when parts are on the truck. Full details are on the Gate Repair in North Palm Beach page.
Gate Installation in North Palm Beach
Installation here means engineering for the site, not just setting posts. North Palm Beach properties range from mid-century ranches to newer waterfront builds, and gate weight, wind exposure, and setback all change the design. We survey, measure, and quote a complete job including the operator, power, and safety edges. The scope is covered on the Gate Installation in North Palm Beach page.
Gate Motor Repair in North Palm Beach
Motor trouble in North Palm Beach often traces to salt corrosion inside the operator housing or a control board damaged by a lightning surge. We diagnose the specific failure before recommending repair or replacement, and we work on the brand already installed rather than forcing a full system swap. See the Gate Motor Repair in North Palm Beach page for what the job covers.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in North Palm Beach
Most North Palm Beach gates run FAAC, BFT, Linear, or Viking operators, and we carry parts and retrofit kits for all four locally. If the board or limit switch is in stock, the repair usually finishes the same day. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in North Palm Beach, FL
These are the ranges we quote most often in North Palm Beach. Every price is written down before work begins, so the number does not move at the door.
| Service | Typical range in North Palm Beach |
|---|---|
| Gate repair diagnostic service call | $60 – $90 |
| Gate hinge and bracket replacement | $150 – $350 |
| Slide gate roller and track repair | $180 – $400 |
| Gate operator replacement (swing or slide) | $800 – $1,500 |
| Control board replacement | $200 – $500 |
| Loop detector replacement | $150 – $300 |
| Safety edge and photo eye replacement | $120 – $280 |
| Manual gate repair and straightening | $200 – $600 |
| Welded gate frame repair | $250 – $700 |
| Gate opener remote and receiver replacement | $75 – $180 |
Salt-air corrosion pushes North Palm Beach pricing toward the higher end of most ranges because we replace with marine-grade hardware and repair or replace corroded mounts rather than bolting onto them. The written quote is the price on the invoice, and the work does not start until you approve that number.
Neighborhoods We Serve in North Palm Beach
We run calls across the whole city, including the areas that see the most gate failures after storms and salt seasons. Local crews are scheduled daily from the South Florida dispatch office, and standard response time in North Palm Beach is same-day or next-morning for most repair calls.
- Country Club / Golf Club neighborhoods
- Lighthouse Drive and the Intracoastal corridors
- North Palm Beach Village and nearby subdivisions
- Waterfront estates east of US-1
- Canterbury Place and surrounding communities
Service Area – Cities Near North Palm Beach
Our North Palm Beach scheduling covers a few adjoining markets for morning runs and overflow. When you call, we will confirm which crew is nearest. We also serve Palm Beach, FL, West Palm Beach, FL, Jupiter, FL, and Royal Palm Beach, FL.
Serving North Palm Beach, FL - Our Local Coverage Area
We’re based in the North Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in North Palm Beach
For emergency repair calls, we dispatch same-day in most cases. North Palm Beach is staffed from our South Florida scheduling office, and a standard repair call is usually handled same-day or next morning. Call (728) 203-2413 to lock in a window.
New gate installations often need association approval or a county permit depending on the setback and height. Repairs to an existing gate rarely do. We provide the specs and measurements your HOA will ask for, but approval timing is on the association.
Yes. Many North Palm Beach communities require specific hardware colors or styles, and we match hinges, operators, and posts to the existing install. We note any HOA finish requirements at the quote stage so the work passes the community’s review.
If your gate is stuck, loud, or not responding, call Lonnie Burke and the crew at Carver Gate Repair West Palm Beach at (728) 203-2413 for a free estimate and a written price before any work begins. We answer live, around the clock.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What North Palm Beach Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Added a battery backup so the gate works during a power outage. Easy to use."
- Mitch L.