Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across West Palm Beach
Gate installation in West Palm Beach costs $2,400 – $9,800 for most residential driveway and pedestrian gates, depending on material, size, and automation. A standard powder-coated aluminum single swing gate with operator runs $3,200 – $5,500 installed, while a custom wrought-iron double gate with automation typically lands between $6,500 and $9,800. We coordinate dispatch from the brand’s Miami office and keep crews scheduled in West Palm Beach five days a week, with emergency installation response available around the clock for failed gates that leave your property unsecured. Call (728) 203-2413 and you’ll get a written price before the work starts, not after.
Why Carver Gate Repair West Palm Beach Is West Palm Beach’s Preferred Gate Installation Company
Homeowners across West Palm Beach call us because we show up on time and write the price down before the first tool comes off the truck. Our Gate Installation team works exclusively on gates and gate motors, which means we’re not splitting attention between decks, drywall, and a dozen other trades. The technician who arrives at your home is background-checked, uniformed, and trained on nine gate-motor brands, including LiftMaster, FAAC, and Elite. We carry parts for those systems in our South Florida service vehicles, which cuts down on the “we’ll come back next week” delays that plague this trade in Gate Installation in West Palm Beach. Lonnie Burke runs the operation to The Garrison Standard: written prices, a full-year guarantee on every installation, and a live person answering the phone 24/7.
Replacing a gate isn’t a one-size-fits-all job, and the houses along Flagler Drive don’t have the same needs as the gated communities out west near Jog Road. We’ve poured post footings in El Cid, squared rack and pinion tracks on sliding gates in Flamingo Park, and rebuilt ornamental pedestrian gates near the Norton Museum. Each one starts with the same process: measure, inspect the existing posts and wiring, and deliver a written quote that stands.
Styles & brands we work with
Driveway Gate Installation in West Palm Beach
Driveway Gate Installation in West Palm Beach typically runs $3,200 – $9,800, with single swing gates on the lower end and automated double gates or slide gates on the higher end. A driveway gate here does more than mark property lines. It has to hold up to salt air off the Atlantic, afternoon thunderstorms, and the occasional tropical storm wind gust, all while cycling open and closed multiple times a day.
When we install a driveway gate in West Palm Beach, the job includes removing the old gate if there is one, setting or repairing posts, hanging the new gate, installing the operator, and wiring the safety sensors required by UL 325. We don’t skip the safety edges or photocells, and we don’t leave the job site with loose concrete or scrap metal in your landscaping.
When Replacement Beats Repair
Some gates are worth saving. Others aren’t. If the hinge post has rotted at the base from salt-laden soil, or if the gate frame itself is rusting through from the inside, you’ll spend more money chasing repairs over five years than you’d spend on a clean installation now. We’ll tell you honestly which side your gate falls on.
Custom and Ornamental Work
West Palm Beach has a lot of older homes with ornamental ironwork that doesn’t match anything stocked at a big-box store. We fabricate or source matching scrollwork, pickets, and finials so a new pedestrian gate doesn’t look like an afterthought next to the original driveway gate.
Sliding Gate Installation in West Palm Beach
Sliding Gate Installation in West Palm Beach costs $4,800 – $9,800 for a complete automated system, including the gate leaf, the motor, the track or cantilever hardware, and the safety sensors. Slide gates are common in the city’s gated communities and on properties where a swing gate doesn’t have the clearance to open without blocking the driveway or hitting a clipped hedge.
Salt air is particularly hard on sliding gate track systems. We install marine-grade stainless bolts and sealed bearing rollers on every coastal slide gate, and we specify track material that won’t pit and flake after three seasons. For pavers, we recommend a cantilever slide gate so the gate doesn’t ride on a ground track at all, which means fewer jams from sand and debris.
Hurricane Wind and Track Debris
West Palm Beach slide gates take a beating during summer storms. Wind-driven palm fronds, sand, and roof debris end up in the track, and plastic wheels strip out fast. We spec steel or nylon-reinforced wheels and design the track with drainage so standing water doesn’t accelerate rust between the rail and the gate frame.
Operator Placement and Coverage
The operator for a slide gate in West Palm Beach should be mounted on the protected side of the gate where possible, away from direct ocean wind-driven rain. We also hardwire a surge protector at the operator to keep afternoon lightning strikes from frying the control board. It’s a small cost on install day and it prevents a no-power gate on a summer afternoon.
Trusted Brands We Service in West Palm Beach
Our technicians are trained on LiftMaster, FAAC, Elite, Mighty Mule, BFT, Linear, Viking, Ghost Controls, and DoorKing systems. For West Palm Beach installations, that means we’re not guessing at wiring diagrams or ordering parts blind. We carry common control boards, safety sensors, and remotes in our South Florida vehicles, so a gate installation doesn’t stall out waiting on a part from a warehouse two states away. If your existing opener is a FAAC or a LiftMaster and you want to keep it, we can hang a new gate on the old operator and test it before we leave. If the operator is past saving, we’ll quote you a replacement on the same written estimate.
Common Gate Installation Problems We See in West Palm Beach Homes
- Rusted hinge posts from salt-laden soil. The bottom of a steel post sits in damp, salty ground and rots from the inside. A gate that sags toward the latch side is usually a post footing failure, not a hinge problem.
- Obsolete control boards from the pre-2000 era. Older FAAC and Linear boards short out after afternoon thunderstorms. Replacement boards are often discontinued, which means retrofitting a new operator onto the existing gate rather than repairing the old one.
- Track teeth stripping on slide gates. Hurricane-force winds push sand, palm debris, and small branches into the rack and pinion. Nylon teeth on the gate’s rack strip clean off, leaving the motor spinning and the gate stuck half-open.
- Salt-spray corrosion on ornamental steel. The coastal air along Flagler Drive and the waterfront neighborhoods pits even powder-coated steel within ten years. Scrolled pickets rust through at the welds first, where the coating is thinnest.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in West Palm Beach, FL
You’ll know the full price before we start. No gate installation in West Palm Beach leaves our shop without a written quote that covers the gate, posts, hardware, operator, safety edges and sensors, wiring, and haul-away of the old gate. A single aluminum driveway gate with a basic operator runs $3,200 – $5,500. A double steel swing gate with automation starts around $5,500. Custom wrought-iron work and slide gates land in the $6,500 – $9,800 range depending on the length of the gate and the condition of the existing posts. On installation work, we schedule a free measure and deliver a written quote rather than promising same-day service, because a gate has to be ordered, built, or fabricated to fit. Call (728) 203-2413 and we’ll set up a time to measure and price it.
Understanding Your Existing Gate Before We Recommend Anything
West Palm Beach has a lot of older gates. Some are worth saving. Some aren’t. The question is always the same: what’s corroded past saving, and what can carry another ten years? We start every install by looking at the posts, the hinges, the operator, and the gate frame itself, and we tell you which components are worth keeping.
A 1990s wrought-iron gate in El Cid that’s been maintained can almost always be saved. We re-weld cracked scrollwork, sandblast surface rust, and re-coat with a marine primer before topcoat. A gate whose frame has rusted through at the bottom rail, or whose hinge posts have lost more than a quarter of their wall thickness to salt corrosion, is a different story. The numbers don’t support saving it. You’d be paying for fabrication labor on a frame that’s already failing.
The same logic applies to operators. A FAAC or LiftMaster from the 2000s can often be retrofitted with a modern safety package, which is cheaper than a full operator replacement and brings the system into UL 325 compliance. But a pre-2000 board with burnt relays and no parts availability is throwing good money after bad. We’ll quote both paths, honestly, and you choose.
In West Palm Beach, the coastal salt air corrodes even powder-coated steel gates within a decade, so successful installations must use marine-grade stainless hardware and sealed post interiors. That requirement is far less critical in inland Wellington just 15 miles west, where the air is drier and the soil isn’t nearly as salty. It’s one reason why a generic gate installation priced from a national catalog tends to fail early out here.
Our crew recently replaced a rusted FAAC swing gate operator on a Mediterranean Revival home in El Cid. The original hinge post had rotted at the base from salt spray; we poured a new post footing with galvanized anchor bolts, re-hung the custom wrought-iron gate, and added a safety photocell to meet UL 325. The gate itself was worth saving because the welds were still solid and the scrollwork was intact. The post and operator had hit the end of their life.
We Also Serve Cities Near West Palm Beach
Our West Palm Beach installation crews also cover Palm Beach, Greenacres, North Palm Beach, and Royal Palm Beach. If you’re anywhere in those areas, the same written-price process and full-year guarantee apply. Call (728) 203-2413 and tell us what you’re working with.
Serving West Palm Beach, FL - Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in West Palm Beach
Yes, in most cases a 1990s or early-2000s operator can be retrofitted with modern safety edges and photocells to meet UL 325 entrapment standards. The operator itself only needs replacing if the control board is obsolete and no aftermarket retrofit kit exists for it, or if the motor casing has rusted through from salt air. We’ll inspect the existing unit, open the housing, and tell you which path applies to your specific model before quoting anything. Call (728) 203-2413 for an inspection in El Cid or anywhere in West Palm Beach.
A hinge post is too corroded to reuse if the wall thickness at the base has lost more than a quarter of its original steel, or if the post is visibly leaning. In West Palm Beach’s salt-laden soil, we typically find this by drilling a small test hole near the base or by checking for flaking rust and soft spots with a hammer. A post that’s still solid gets galvanized anchor brackets and a new gate. A post that’s rotted gets a new footing and a new post, which adds $800 – $1,500 to the installation but prevents a sagging gate in three years. Call (728) 203-2413 and we’ll assess yours in person.
Yes. Coated steel tracks pit and flake within a few seasons in West Palm Beach’s salt air, and when the coating fails, the track rusts from the inside out and the gate starts grinding. We use marine-grade stainless bolts and nylon-reinforced or sealed steel track components rated for coastal environments. For paver driveways, we usually recommend a cantilever slide gate that doesn’t use a ground track at all, which eliminates the rust problem and the debris-jam problem together. Call (728) 203-2413 for a free measure and a written quote.
You need a saw-cut loop detector installed 1.5 to 2 inches deep in the paver base material, not under the pavers themselves, so the loop wire sits in a stable position and doesn’t shift when pavers settle. For West Palm Beach’s sandy soil and summer rain, we recommend a rubberized loop sealant over the saw-cut channel to prevent water intrusion, and a dual-channel loop detector with adjustable sensitivity for consistent detection. Call (728) 203-2413 and we’ll spec the right loop for your driveway and gate.
Yes, we match historical scrollwork patterns as closely as the original fabrication allows. We take dimensional photos and pattern tracings of the existing gate, then work with a local South Florida fabricator who reproduces the scrolls, finials, and picket profile so a new pedestrian gate reads as part of the original design. In Prospect Park and El Cid, where the homes are older and the ironwork is distinctive, this is usually the difference between a gate that looks right and one that looks dropped in. Call (728) 203-2413 and we’ll walk the site and quote the match.
Call Carver Gate Repair West Palm Beach for Your Gate Installation
If you’re ready to replace a gate, add a driveway gate, or find out whether your old gate is worth saving, call us at (728) 203-2413 for a free measure and a written quote. Every installation includes a written price before work starts, background-checked and uniformed technicians on every call, and a 365-Day Done Right Promise in writing. The number on your quote is the number you pay. Talk to a live person, 24/7. We work to The Garrison Standard, and we’ve been doing it since 2008.
Written by Lonnie Burke, Owner at Carver Gate Repair West Palm Beach, serving West Palm Beach and surrounding communities with written prices and a full-year guarantee on every installation.