Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor Repair Across Lake Park
Gate motor repair in Lake Park typically runs $180 to $640 depending on whether we’re replacing a control board, a swing arm, or the full operator. Most jobs in town are completed the same day we arrive, and we carry parts for the older LiftMaster, Linear, Viking, and DoorKing units that show up most often on Lake Park’s mid-century properties. If your gate won’t open, grinds when it moves, or stopped responding to the keypad, call (728) 203-2413 and a live person will answer. We dispatch background-checked technicians to Lake Park neighborhoods including those off 10th Street, Park Avenue, and Old Dixie Highway, and every job gets a written price before the first tool comes off the truck.
Why Carver Gate Repair West Palm Beach Is Lake Park’s Preferred Gate Motor Repair Company
Lake Park has a lot of older gates. That’s not a knock on the town. It’s just the reality of a place built mostly between the 1950s and 1970s, where duplexes and small apartment buildings still have their original chain-link and metal swing gates. Our technicians know these gates well because they work on them every week. We know which models strip gears when a 1950s hinge post starts to sag, and we know which control boards fail after a few seasons of coastal salt air.
The crew working in Lake Park operates to The Garrison Standard, the same written process that Carver Gate Repair has used since 2008. That means a written quote before any work starts, a written 365-Day Done Right Promise on every repair, and a free second visit if anything fails inside the guarantee year. Homeowners in Lake Park who have been burned by no-shows or door prices that move after the job opens tell us they notice the difference. The technician shows up in uniform, has a background check on file, and can explain the repair in plain sentences before touching anything.
Lonnie Burke leads the Carver Gate Repair West Palm Beach team. Under Lonnie’s direction, every Lake Park call gets the same handling: a real person answers the phone around the clock, the diagnostic findings are written down, and the repair is quoted on paper before it’s approved. No pressure, no mystery pricing, no mess left behind.
Styles & brands we work with
Gate Keypad in Lake Park
Gate keypad replacement in Lake Park usually costs $140 to $320 including parts and labor. These keypads sit out in the sun and salt air all year, and the membrane buttons on older units crack or lose their seal after a few Florida summers. When that happens, the gate stops responding to codes, or tenants start pressing the same digit six times before anything registers.
Weather Sealing and Common Failures
Most keypad failures we see in Lake Park start with moisture. Condensation gets behind the faceplate, corrodes the terminal strip, and shorts the relay that tells the operator to open. On a 1960s duplex off 10th Street, we replaced a DoorKing keypad that had been working on and off for a year. The inside was chalked with white corrosion from salt air, and the wiring had to be cut back and re-terminated before the new keypad could be paired to the operator.
Retrofit Between Manual and Automated Gates
Some Lake Park apartments built with manual gates added keypads later, often wired to a standalone receiver box mounted near the operator. When those older retrofits fail, the fix is usually simpler than homeowners expect: a new receiver and keypad pair, correctly weather-sealed, around $200 to $300. We always test the full cycle from street side and tenant side before we consider the job done.
Gate Closer Spring in Lake Park
Gate closer spring replacement in Lake Park typically runs $120 to $260 per gate. These springs counterbalance the gate’s weight so the operator doesn’t fight the full load every cycle. When a spring snaps or loses tension on a chain-link gate near the railroad corridor along Old Dixie Highway, the gate starts drifting open, slamming shut, or binding against the post.
Why Springs Fail Early Near the Coast
Springs on Lake Park gates fail faster than inland units because the same salt air that rusts hardware also eats away the spring’s coating. Once the coil surfaces pit, a single hot afternoon cycle can snap the spring while the gate is mid-swing. We replace springs in matched pairs when one has failed, because the other is usually just as weakened and will break a few weeks later if left alone.
When a Sagging Gate Is the Real Problem
A spring that repeatedly loses tension or keeps breaking is often a symptom of a deeper problem: the hinge post has started to lean. On several Lake Park duplex properties, we’ve found the original 1950s post rotted at the base from years of rain splash and humidity. Replacing just the spring would buy a few months. Setting a new post footing and rehanging the gate solves it for a decade. That’s the honest math we walk through with every homeowner before quoting anything.
Trusted Brands We Service in Lake Park
Our technicians are trained on nine gate-motor brands, and in Lake Park we most often service Viking, Ghost Controls, DoorKing, and Elite systems. That matters when a control board fails on an apartment gate that tenants use forty times a day. We stock common parts locally for these brands, which means many Lake Park repairs happen in a single visit rather than waiting on a back-ordered board from a distributor. If your existing operator is a brand we know well, we can usually match the replacement part to the exact model already on the post, so the repair doesn’t force a full system swap and a bigger invoice.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Motor Repair Problems We See in Lake Park Homes
- Corroded operator internals from salt air. Lake Park’s coastal humidity works into unsealed motor housings and slowly eats the limit switches and capacitor connections. The gate starts, stops mid-cycle, or refuses to move after a heavy rain, then works fine two days later.
- Sagging swing gates on original hinge posts. Many of the metal swing gates hung in the 1950s and 1960s sit on posts that were never built to carry an automated operator’s repeated load. The gate dips a few degrees, the rack and pinion binds, and the motor gears strip trying to force the movement.
- Loop detectors failing in compact apartment lots. The buried loop wires under cracked asphalt hold up fine until moisture gets into a broken seam. Then the detector reads phantom vehicles, holds the gate open for everyone, or ignores a car waiting to leave. Afternoon thunderstorms in Lake Park make this failure show up fast.
- Keypads and receivers knocked out by lightning or power surges. Summer storms roll through Palm Beach County nearly every afternoon from June to September. A close strike doesn’t need to hit the gate directly. A surge through the control board is enough to kill a receiver or scramble the keypad memory on older units.
Pricing for Gate Motor Repair in Lake Park, FL
Here’s what Lake Park homeowners can expect to pay for common gate motor work. A basic diagnosis and limit switch adjustment runs $95 to $180. Replacing a control board on a Viking or DoorKing operator runs $220 to $480 depending on the board and the system’s age. A full swing arm replacement with labor typically lands between $280 and $640. Replacing both closer springs on a double gate starts around $240 and goes up from there. The exact number depends on what’s actually failed, not on what we can upsell. Every job gets a written price before work starts, and that number doesn’t move at the door. Call (728) 203-2413 for a free estimate. If a repair seems more expensive than replacing a rusted post instead, we’ll tell you that too.
We Also Serve Cities Near Lake Park
Carver Gate Repair West Palm Beach serves Lake Park and the surrounding area, including West Palm Beach, Boynton Beach, Jupiter, and Greenacres. Scheduling is coordinated from our South Florida office, and the crews dispatched to work in Lake Park know the local building stock and the gates that come with it. If you’re in a neighboring city and need Gate Motor Repair, the same written prices and one-year guarantee apply.
Serving Lake Park, FL - Our Local Coverage Area
We’re based in the Lake Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in Lake Park
Yes, and it’s more common in Lake Park than in most nearby towns because so many duplexes and small apartments along 10th Street still have original manual slide gates with non-standard post footings. The retrofit sometimes requires setting a new post or reinforcing the existing footing before the operator mounts, which is why we quote the work after seeing the gate in person, not from a photo over the phone. Call (728) 203-2413 and we’ll schedule a free site look and a written price.
Moisture is the most common trigger, either through a worn housing seal, a cracked loop detector wire under the driveway, or condensation inside the keypad. Lake Park’s pattern of hot days and sudden afternoon storms means unsealed electronics get a hard workout from spring through fall. We waterproof every replacement we install and recommend weather-sealed enclosures for operators mounted near the coast.
Entrapment protection is the safety system, usually a photocell or contact edge, that stops and reverses a gate if a car, person, or pet is in the way while the gate moves. Gates built before current UL 325 standards often lack this entirely, and a gate with an added motor but no safety photocell is dangerous to operate. If we’re retrofitting a manual Lake Park gate or replacing an old operator, we include current safety equipment as part of the scope, not as an optional line item.
We stage the work so at least one access point stays open during the repair, and we schedule the loud or long work for hours when the lot sees less traffic. On compact lots off Park Avenue, that often means working one gate leaf at a time on a double gate, or using hand tools instead of equipment that needs a wide swing radius. Tenants usually notice the gate is fixed before they notice we were ever there.
The answer depends on the post, not the gate. If the hinge post is still solid and the sag comes from a worn hinge or a bent top rail, we can usually rehang the gate and replace the motor gears for a few hundred dollars. But if the 1950s post has rotted at the base, which happens regularly in Lake Park’s salt air, replacing the post and setting a new footing is the cheaper five-year answer compared to replacing the stripped gears every eighteen months. We’ll show you the post condition in person before you spend anything.
Written by Lonnie Burke, Owner at Carver Gate Repair West Palm Beach.